MinTS Interface Module
psas·mints-scada-hardware·interface-module/interface-module.kicad_pcb
About the MinTS Interface Module
MinTS Interface Module is an open source PCB design by psas, published on GitHub. It is a 2-layer board measuring 79 × 83 mm, with 107 components from 31 distinct parts.
Other key parts include the MCP3464RT-E/NC, 140357145200 and TCA9548ARGERQ1. By type, the board carries 51 resistors, 24 diodes, 10 ICs, 8 transistors, 7 capacitors and 3 connectors.
From the project
Minimal Test Stand Supervisory
2. Either reboot or run sudo udevadm control --reload-rules && sudo udevadm trigger to reload the udev rules
To build and upload: 1. Open the PlatformIO tab in the left toolbar 2. Under PROJECT TASKS > Build > General execute the Build procedure by clicking on it 3. Execute Upload to upload to the microcontroller. Ensure that only a single board is plugged in to ensure you are writing to the correct device.
Main components on the MinTS Interface Module
MinTS Interface Module bill of materials (BOM)
107 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP3464RT-E/NC MCP3464 | UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm | U101 |
| 8 | 140357145200 | SO-4_4.4x3.6mm_P2.54mm | U201, U202, U203, U204, U205, U206, U207, U208 |
| 1 | TCA9548ARGERQ1 TCA9548 | Texas_RGE0024C_VQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm | U301 |
| 8 | DMP3050LVT-7 | TSOT-23-6 | Q201, Q202, Q203, Q204, Q205, Q206, Q207, Q208 |
| 2 | TB007-508-08BE Conn_01x08 | TerminalBlock_CUI-8_P5.08mm | J1, J2 |
| 1 | 5452257 Conn_01x02 Phoenix | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | 1206L035/30WR 350mA Poly | Fuse_1206_3216Metric | F2 |
| 1 | 696108003002 15A slow | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F201 |
| 1 | 1206L012WR 150mA Poly | Fuse_1206_3216Metric | F301 |
| 1 | 220ADA16 SW_Coded_SH-7050 | Nidec_Copal_SH-7010C | SW1 |
| 8 | 1SS396,LF 1SS396 | SOT-23 | D101, D102, D103, D104, D105, D106, D107, D108 |
| 8 | SMBJ5360B-TP MCC | D_SMB | D201, D202, D203, D204, D213, D214, D215, D216 |
| 8 | B1911USD-20D000114U1930 red | LED_0603_1608Metric | D205, D206, D207, D208, D209, D210, D211, D212 |
| 4 | CL10A105KL8NNNC 1u | C_0603_1608Metric | C101, C103, C104, C301 |
| 2 | 0603DD106MAT2A 10u | C_0603_1608Metric | C102, C105 |
| 1 | CL10B104KO8NFNC 0.1u | C_0603_1608Metric | C106 |
| 2 | RMCF0603FT10K0 10k | R_0603_1608Metric | R1, R3 |
| 1 | INFO1 | R_0603_1608Metric | R2 |
| 1 | INFO2 | R_0603_1608Metric | R4 |
| 1 | RMCF0603FT1R00 1 | R_0603_1608Metric | R101 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | RMCF0603ZT0R00 0 | R_0603_1608Metric | R102, R103, R301, R302, R303, R328 |
| 4 | R_ADC_TOP | R_0603_1608Metric | R104, R108, R112, R116 |
| 4 | R_ADC_POS | R_0603_1608Metric | R105, R109, R113, R117 |
| 4 | R_ADC_BTM | R_0603_1608Metric | R106, R110, R114, R118 |
| 4 | R_ADC_NEG | R_0603_1608Metric | R107, R111, R115, R119 |
| 4 | R_SHUNT | R_0603_1608Metric | R120, R121, R122, R123 |
| 4 | R_BIAS | R_0603_1608Metric | R124, R125, R126, R127 |
| 10 | RMCF0603FT4K70 4k7 | R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R207, R208 +2 |
| 2 | CAY16-331J4LF 330 | R_Array_Convex_4x0603 | RN201, RN202 |
| 2 | CAY16-512J4LF 5k1 | R_Array_Convex_4x0603 | RN203, RN204 |
| 2 | CAY16-472J4LF 4k7 | R_Array_Convex_4x0603 | RN301, RN302 |
MinTS Interface Module design files
The KiCad project lives in the psas/mints-scada-hardware repository on GitHub; these links point at the commit this page was built from.
MinTS Interface Module: common questions
How big is the MinTS Interface Module?
The MinTS Interface Module measures 79 × 83 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MinTS Interface Module?
107 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the MinTS Interface Module design files?
From the psas/mints-scada-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MinTS Interface Module design in my own project?
The repository has no license, so all rights stay with psas. Use it as a reference, and ask the author before reusing the design.