STM32F042C6T Dev Board
psas·mints-scada-hardware·stm32devboard/stm32devboard.kicad_pcb
About the STM32F042C6T Dev Board
STM32F042C6T Dev Board is an open source STM32 PCB design by psas, published on GitHub. It is a 4-layer board measuring 20.3 × 61 mm, with 43 components from 22 distinct parts.
Its main chip is the STM32F042C6T6, from the STM32 family. Other key parts include the AP63203WU-7, TCAN332DR and IP4234CZ6,125. By type, the board carries 16 capacitors, 12 resistors, 4 ICs, 3 connectors, 3 diodes and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Minimal Test Stand Supervisory
2. Either reboot or run sudo udevadm control --reload-rules && sudo udevadm trigger to reload the udev rules
To build and upload: 1. Open the PlatformIO tab in the left toolbar 2. Under PROJECT TASKS > Build > General execute the Build procedure by clicking on it 3. Execute Upload to upload to the microcontroller. Ensure that only a single board is plugged in to ensure you are writing to the correct device.
Main components on the STM32F042C6T Dev Board
STM32F042C6T Dev Board bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042C6T6 STM32F042C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AP63203WU-7 AP63203WU | TSOT-23-6 | U2 |
| 1 | TCAN332DR TCAN332 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | IP4234CZ6,125 | TSOP-6_1.65x3.05mm_P0.95mm | U4 |
| 1 | ECS-160-10-36Q-ES-TR | Crystal_SMD_2520-4Pin_2.5x2.0mm | X1 |
| 2 | PH1-20-UA Conn_01x20 | PinHeader_1x24_P2.54mm_Vertical | J1, J2 |
| 1 | 12402012E212A USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J3 |
| 1 | 1206L025YR 500mA poly | Fuse_1206_3216Metric | F1 |
| 2 | TS21-34-035-BK-260-SMT-TR SW_SPST | SW_SPST_3.4x3.4 | SW1, SW2 |
| 1 | B1911UY--20D000114U1930 AMBER | LED_0603_1608Metric | D1 |
| 1 | SD1206T040S1R0 D_Schottky | D_1206_3216Metric | D2 |
| 1 | B1911NG--20D000214U1930 GREEN | LED_0603_1608Metric | D3 |
| 1 | IND METAL POWDER 4.7UH 2.2A 4.7u | L_1210_3225Metric | L1 |
| 1 | GRM188R6YA106MA73D 10u | C_0603_1608Metric | C1 |
| 2 | CL10A226MP8NUNE 22u | C_0603_1608Metric | C2, C3 |
| 10 | CL10B104KB8NNWC 0.1u | C_0603_1608Metric | C4, C5, C6, C7, C8, C9, C10, C11 +2 |
| 1 | CAP CER 1000PF 10V X7R 0603 1n | C_0603_1608Metric | C12 |
| 2 | GCM1885C2A200JA16D 20p | C_0603_1608Metric | C15, C16 |
| 2 | RMCF0603FT10K0 10k | R_0603_1608Metric | R1, R11 |
| 4 | RMCF0603ZT0R00 0 | R_0603_1608Metric | R2, R3, R5, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | RMCF0603FT5K10 5k1 | R_0603_1608Metric | R4, R9, R10, R12 |
| 2 | RMCF0603FT60R4 60.4 | R_0603_1608Metric | R7, R8 |
STM32F042C6T Dev Board design files
The KiCad project lives in the psas/mints-scada-hardware repository on GitHub; these links point at the commit this page was built from.
STM32F042C6T Dev Board: common questions
What microcontroller does the STM32F042C6T Dev Board use?
The STM32F042C6T Dev Board is built around the STM32F042C6T6, from the STM32 family.
How big is the STM32F042C6T Dev Board?
The STM32F042C6T Dev Board measures 20.3 × 61 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F042C6T Dev Board?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F042C6T Dev Board design files?
From the psas/mints-scada-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32F042C6T Dev Board design in my own project?
The repository has no license, so all rights stay with psas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F042C6T Dev Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in mints-scada-hardware
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k