Display module
About the Display module
Display module is an open source PCB design by pulseopen, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 38.5 × 20 mm, with 13 components from 5 distinct parts.
By type, the board carries 9 capacitors, 3 connectors and 1 resistor.
It belongs with the displays & leds, audio and iot & wireless designs in this gallery.
From the project
An almost fully modular open source phone running off of the DART-MX8M-MINI SoM.
Built around the MCM-iMX93 System-on-Module, PulsePhone uses Hirose DF40 board-to-board connectors across all subsystems — keeping modules isolated, swappable, and independently developable.
The Main Board is the hub of the system, hosting the MCM-iMX93 SoM, an onboard DAC, and all signal routing. Every peripheral connects to it via DF40 connectors.
Full connector pinout in MBI-Lite Specification.
Display module bill of materials (BOM)
13 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | THD THD0515-29CL-SN | FPC-29-P0.5 | J1 |
| 1 | FPC LOGIC | FPC_7 | J2 |
| 1 | DF40 | Hirose_DF40C-34DS-0.4V_2x17_P0.4mm | J4 |
| 9 | 20UF 20uF | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 1 | 100 OHM | R_1206_3216Metric | R1 |
Display module design files
The KiCad project lives in the pulseopen/PulsePhone repository on GitHub; these links point at the commit this page was built from.
Display module: common questions
How big is the Display module?
The Display module measures 38.5 × 20 mm, has 4 copper layers and is 1.580794 mm thick.
How many components are on the Display module?
13 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Display module design files?
From the pulseopen/PulsePhone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Display module design in my own project?
Yes, under the terms of its GPL-3.0 license, which pulseopen chose for the repository.
More boards in PulsePhone
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k