R-2R DAC

Quaot·R-2R_DAC

This repository ships a schematic but no board layout.

About the R-2R DAC PCB

R-2R DAC is an open source PCB design by Quaot, published on GitHub under the MIT license. It is a board, with 9 components from 4 distinct parts.

By type, the board carries 4 resistors and 2 connectors.

It belongs with the test & measurement designs in this gallery.

From the project

A 4-bit R-2R DAC drawn in KiCad, simulated in SPICE for all 16 codes and checked step by step on an oscilloscope

Each bit can be switched on or off, either 3.3V or 0V (ground). The on/off state of each bit can be represented, from 1000, 0100, 0010, 0001.

$$V{out} = V{in} \cdot \frac{R2}{R1 + R_2}$$

each bit gives half of the one above it because the equivalent resistance between each node and the ground is 2R / it remains the same for each node.

The voltage at the node $V{out}$ is changed and halved for each corresponding change in bits from 1000 to 0100, etc, $\frac{1}{2}$ to $\frac{1}{4}$ etc all the way to $\frac{1}{16}$. Thus, the finest possible resolution in this case is $\frac{1}{16}$, when…

R-2R DAC bill of materials (BOM)

9 components, 4 distinct parts.

QtyPartRefs
1
Bits in
J1
1
Analog out
J2
3
10k
RL0, RL1, RL2
4
20k
R0, R1, R2, R3

R-2R DAC design files

The KiCad project lives in the Quaot/R-2R_DAC repository on GitHub; these links point at the commit this page was built from.

R-2R DAC: common questions

How many components are on the R-2R DAC?

9 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the R-2R DAC design files?

From the Quaot/R-2R_DAC repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the R-2R DAC design in my own project?

Yes, under the terms of its MIT license, which Quaot chose for the repository.

Similar boards