HardLabs

Runout8x

rafal-molotkiewicz·Runout8x

Runout8x PCB layout, top view — open source RP2040/RP2350 board by rafal-molotkiewicz

About the Runout8x PCB

Runout8x is an open source RP2040/RP2350 PCB design by rafal-molotkiewicz, published on GitHub. It is a 2-layer board measuring 22.9 × 129.5 mm, with 19 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 8 diodes, 2 modules and 1 IC.

Main components on the Runout8x

XIAO-RP2040-SMD

Runout8x bill of materials (BOM)

19 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-SMD
U1
1
Fan_Tacho_PWM
M1
1
Fan_3pin
M3
8
~
Omron D2F-01F1, Omron D2F-01F2, Omron D2F-01F3, Omron D2F-01F4, Omron D2F-01F5, Omron D2F-01F6, Omron D2F-01F7, Omron D2F-01F8
8
LED_Dual_AKA
D1, D2, D3, D4, D5, D6, D7, D8

Runout8x design files

The KiCad project lives in the rafal-molotkiewicz/Runout8x repository on GitHub; these links point at the commit this page was built from.

Runout8x: common questions

What microcontroller does the Runout8x use?

The Runout8x is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.

How big is the Runout8x PCB?

The Runout8x measures 22.9 × 129.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Runout8x?

19 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Runout8x design files?

From the rafal-molotkiewicz/Runout8x repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Runout8x design in my own project?

The repository has no license, so all rights stay with rafal-molotkiewicz. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Runout8x without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards