OSO-BOOK-C1

joeycastillo·The-Open-Book·OSO-BOOK-C1/OSO-BOOK-C1.kicad_pcb

OSO-BOOK-C1 PCB layout, top view — open source RP2040/RP2350 board by joeycastillo

About the OSO-BOOK-C1 PCB

OSO-BOOK-C1 is an open source RP2040/RP2350 PCB design by joeycastillo, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 85 × 115 mm, with 29 components from 16 distinct parts.

Its main chip is the SC0918, from the RP2040/RP2350 family. Other key parts include the OSO-BOOK-C2-01, MEM2075-00-140-01-A and GD25Q16CTIGR. By type, the board carries 8 switches, 4 ICs, 4 resistors, 3 connectors, 3 capacitors and 2 transistors.

From the project

A note from the project creator: The Open Book was my first real electronics project; the earliest designs date to late 2019. I have learned a lot since those early days, and as such, here three years later, I am hitting reset. At this time the repository contains a version of th

A note from the project creator: The Open Book was my first real electronics project; the earliest designs date to late 2019. I have learned a lot since those early days, and as such, here three years later, I am hitting reset. At this time the repository contains a version of the Open Book designed around the Raspberry Pi Pico. It's optimized for low part count and easy hand assembly, but it runs on AAA batteries and may not be as svelte as some folks might prefer. At a later date, I hope to design a followup with built-in LiPo charging and a slimmer profile, but at this time, this version…

Main components on the OSO-BOOK-C1

OSO-BOOK-C1 bill of materials (BOM)

29 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SC0918
Pico
U1
1
OSO-BOOK-C2-01
U2
1
MEM2075-00-140-01-A
MEM2075
U3
1
GD25Q16CTIGR
GD25Q16C
U4
2
DMG3415U-7
Q_PMOS_GSD
Q1, Q2
2
455-1790-1
JST-PH3
J1, J2
1
455-1750-1
JST-PH4
J3
2
434351045816
SW_Push
B1, B2
7
TL1107AF180WQ
SW_Push
B3, B4, B5, B6, B7, B8, B9
1
1022
Battery
BT1
2
Jumper_2_Open
JP1, JP2
1
JS102011SAQN
SW_SPDT
SW1
2
CL31B106KQHNFNE
10µF
C1, C2
1
CL21B105KAFNNNE
1µF
C3
2
RC0805JR-071KL
1k
R1, R2
2
RMCF1206JT10K0
10K
R3, R4

OSO-BOOK-C1 design files

The KiCad project lives in the joeycastillo/The-Open-Book repository on GitHub; these links point at the commit this page was built from.

OSO-BOOK-C1: common questions

What microcontroller does the OSO-BOOK-C1 use?

The OSO-BOOK-C1 is built around the SC0918, from the RP2040/RP2350 family.

How big is the OSO-BOOK-C1 PCB?

The OSO-BOOK-C1 measures 85 × 115 mm, has 2 copper layers and is 1 mm thick.

How many components are on the OSO-BOOK-C1?

29 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OSO-BOOK-C1 design files?

From the joeycastillo/The-Open-Book repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OSO-BOOK-C1 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which joeycastillo chose for the repository.

Can I test firmware for the OSO-BOOK-C1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in The-Open-Book

Similar boards