HardLabs

Edgeai predictive monitor

rahuljeyaraj·edgeai-predictive-monitor·hardware/kicad/motor_driver_rig.kicad_sch

This repository ships a schematic but no board layout.

About the Edgeai predictive monitor PCB

Edgeai predictive monitor is an open source AVR/Arduino PCB design by rahuljeyaraj, published on GitHub under the MIT license. It is a board, with 8 components from 4 distinct parts.

Its main chip is the Arduino Uno + CNC Shield V3, from the AVR/Arduino family. Other key parts include the A4988 / DRV8825 stepper driver. By type, the board carries 6 modules and 1 IC.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Real KiCad 9 schematics (symbols + nets, not block diagrams) for the three wiring diagrams in report/REPORT.md: the base station, a satellite node, and the motor-driver rig. Pinouts are transcribed from REPORT.md Chapter 2.3 / 3.3 / Appendix B — if a pin changes there, regenerate

Real KiCad 9 schematics (symbols + nets, not block diagrams) for the three wiring diagrams in report/REPORT.md: the base station, a satellite node, and the motor-driver rig. Pinouts are transcribed from REPORT.md Chapter 2.3 / 3.3 / Appendix B — if a pin changes there, regenerate here.

Each script writes a matching .kicadpro (minimal -- KiCad backfills its defaults on first open; sheets points at the .kicadsch root UUID) so the pair opens as a self-contained project, not a loose sheet that makes KiCad prompt to create one. Each .kicadsch` also opens directly in KiCad (Eeschema) on its own.…

Main components on the Edgeai predictive monitor

Arduino Uno + CNC Shield V3A4988 / DRV8825 stepper driver

Edgeai predictive monitor bill of materials (BOM)

8 components, 4 distinct parts.

QtyPartRefs
1
Arduino Uno + CNC Shield V3
U1
3
A4988 / DRV8825 stepper driver
A1, A2, A3
3
NEMA-17 stepper motor
M1, M2, M3
1
12-24V DC power supply
PS1

Edgeai predictive monitor design files

The KiCad project lives in the rahuljeyaraj/edgeai-predictive-monitor repository on GitHub; these links point at the commit this page was built from.

Edgeai predictive monitor: common questions

What microcontroller does the Edgeai predictive monitor use?

The Edgeai predictive monitor is built around the Arduino Uno + CNC Shield V3, from the AVR/Arduino family.

How many components are on the Edgeai predictive monitor?

8 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Edgeai predictive monitor design files?

From the rahuljeyaraj/edgeai-predictive-monitor repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Edgeai predictive monitor design in my own project?

Yes, under the terms of its MIT license, which rahuljeyaraj chose for the repository.

Can I test firmware for the Edgeai predictive monitor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards