Passive-ADC
rajsinghtech·Mr-Ohm-IowaState·Board_Design_Files/Passive-ADC/Passive-ADC.kicad_pcb
About the Passive-ADC PCB
Passive-ADC is an open source PCB design by rajsinghtech, published on GitHub. It is a 4-layer board measuring 21.9 × 16.5 mm, with 13 components from 13 distinct parts.
By type, the board carries 8 resistors, 3 capacitors and 2 connectors.
From the project
Senior Design Analog to Digital Schematics
The BetterBots project aims to teach coding and engineering concepts through hands-on experimentation with a robot.
Passive-ADC bill of materials (BOM)
13 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FPGA Terminal | PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | ADC Terminal | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | .1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 470p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 150P 68p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K 18k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 5.1K 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 8.2K 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 3.3K 8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 523 1.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 6.8K 6.8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 3.3K 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
Passive-ADC design files
The KiCad project lives in the rajsinghtech/Mr-Ohm-IowaState repository on GitHub; these links point at the commit this page was built from.
Passive-ADC: common questions
How big is the Passive-ADC PCB?
The Passive-ADC measures 21.9 × 16.5 mm, has 4 copper layers and is 0.7912 mm thick.
How many components are on the Passive-ADC?
13 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Passive-ADC design files?
From the rajsinghtech/Mr-Ohm-IowaState repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Passive-ADC design in my own project?
The repository has no license, so all rights stay with rajsinghtech. Use it as a reference, and ask the author before reusing the design.