LUNA USB Multitool

rajsinghtech·Mr-Ohm-IowaState·Digital_Design_Files/orbtrace/deps/luna/hardware/rev0/luna_rev0.kicad_pcb

LUNA USB Multitool PCB layout, top view — open source Microchip SAM board by rajsinghtech

About the LUNA USB Multitool PCB

LUNA USB Multitool is an open source Microchip SAM PCB design by rajsinghtech, published on GitHub. It is a 4-layer board measuring 48 × 48 mm, with 153 components from 56 distinct parts.

Its main chip is the ATSAMD11D14A-MUT, from the Microchip SAM family. Other key parts include the ECP5-BGA256, AP22811A, 74AUP2G126, AP7366-33W5-7 and TCR2EF115. By type, the board carries 58 capacitors, 53 resistors, 15 ICs, 14 diodes, 10 connectors and 2 switches.

From the project

Senior Design Analog to Digital Schematics

LUNA is a full toolkit for working with USB using FPGA technology; and provides hardware, gateware, and software to enable USB applications.

Some things you can use LUNA for, currently:

- Protocol analysis for Low-, Full-, or High- speed USB. LUNA provides both hardware designs and gateware that allow passive USB monitoring. When combined with the ViewSB USB analyzer toolkit, LUNA hardware+gateware can be used as a full-featured USB analyzer. - Creating your own Low-, Full-, High-, or (experimentally) Super- speed USB device. LUNA provides a collection of Amaranth gateware that allows you…

LUNA USB Multitool, from the project README
From the project README

Main components on the LUNA USB Multitool

ECP5-BGA256AP22811A74AUP2G126AP7366-33W5-7TCR2EF115MIC5504-2.5YM5ATSAMD11D14A-MUTW25Q32JVSSUSB3343HyperRAM

LUNA USB Multitool bill of materials (BOM)

153 components, 56 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ECP5-BGA256
IC1
3
AP22811A
U1, U12, U13
2
74AUP2G126
U2, U14
1
AP7366-33W5-7
U3
1
TCR2EF115
U4
1
MIC5504-2.5YM5
U5
1
ATSAMD11D14A-MUT
U6
1
W25Q32JVSS
U7
3
USB3343
U8, U9, U11
1
HyperRAM
U10
1
Osc60MHz
Y1
3
USB_C_Receptacle_USB2.0
J1, J2, J4
1
USB_A
J3
1
Conn_FPGA_JTAG_10
J5
1
Conn_ARM_JTAG_SWD_10
J6
1
PMOD_A
J7
2
Conn_Coaxial
J8, J9
1
PMOD_B
J11
1
BTN_DFU
SW1
1
BTN_RESET
SW2
Show 36 more
QtyPartRefs
2
PMEG3050EP,115
D1, D8
1
RED
D2
1
ORANGE
D3
1
YELLOW
D4
1
GREEN
D5
1
BLUE
D6
1
PURPLE
D7
1
PMEG4010ESBYL
D9
2
ICE BLUE
D10, D14
2
PINK
D11, D13
1
WHITE
D12
4
2.2uF
C1, C2, C4, C20
1
150P
2.2uF
C3
32
0.1uF
C5, C7, C8, C9, C10, C11, C12, C13 +24
14
1uF
C6, C22, C28, C29, C30, C36, C37, C42 +6
6
390pF
C25, C47, C51, C52, C56, C57
1
10uF
C53
1
100
2.2K
R1
1
10K
2.2K
R2
1
5.1K
10K
R3
1
8.2K
8.06k±1%
R4
2
3.3K
2.2K
R5, R8
1
523
10K
R6
2
6.8K
5.5K
R7, R11
1
820
2.2K
R9
1
2.4K
2.2K
R10
1
3.3K
10K
R12
8
10K
R13, R14, R23, R24, R25, R29, R40, R41
4
1K
R15, R26, R27, R28
4
8.06k±1%
R16, R18, R20, R43
3
20K
R17, R19, R21
1
15K
R22
3
2.2K
R30, R31, R42
6
5.49K±1%
R32, R33, R34, R35, R36, R37
8
18.7K±1%
R38, R39, R44, R45, R46, R47, R48, R49
4
33
RN1, RN2, RN3, RN4

LUNA USB Multitool design files

The KiCad project lives in the rajsinghtech/Mr-Ohm-IowaState repository on GitHub; these links point at the commit this page was built from.

LUNA USB Multitool: common questions

What microcontroller does the LUNA USB Multitool use?

The LUNA USB Multitool is built around the ATSAMD11D14A-MUT, from the Microchip SAM family.

How big is the LUNA USB Multitool PCB?

The LUNA USB Multitool measures 48 × 48 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the LUNA USB Multitool?

153 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LUNA USB Multitool design files?

From the rajsinghtech/Mr-Ohm-IowaState repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the LUNA USB Multitool design in my own project?

The repository has no license, so all rights stay with rajsinghtech. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LUNA USB Multitool without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in Mr-Ohm-IowaState

Similar boards