Cpad PCB phob2
About the Cpad PCB phob2
Cpad PCB phob2 is an open source PCB design by rana-sylvatica, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 31.6 × 54.4 mm, with 14 components from 8 distinct parts.
Other key parts include the MCP3202. By type, the board carries 6 resistors, 4 switches, 3 capacitors and 1 IC.
From the project
modkit to turn GameCube controller c-stick into 4 digital directional buttons
This repository contains the following design files: - 3D models of the c-pad center insert and buttons, both as individual components and panelized for ordering from a 3D printing service - KiCad PCB design files for both the OEM/Phob1.X and Phob2.0 versions of the project - PCB fabrication files (Gerber, BOM, CPL) for both the OEM/Phob1.X and Phob2.0 versions of the project
Main components on the Cpad PCB phob2
Cpad PCB phob2 bill of materials (BOM)
14 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP3202 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | C395225 C_left | SW-TH_L6.2-W6.2-P5.00 | SW1 |
| 1 | C395225 C_up | SW-TH_L6.2-W6.2-P5.00 | SW2 |
| 1 | C395225 C_down | SW-TH_L6.2-W6.2-P5.00 | SW3 |
| 1 | C395225 C_right | SW-TH_L6.2-W6.2-P5.00 | SW4 |
| 3 | 100N 100n | C_0402_1005Metric | C1, C2, C3 |
| 2 | 1.1K 1.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 4 | 5.6K 5.6k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8 |
Cpad PCB phob2 design files
The KiCad project lives in the rana-sylvatica/c-pad repository on GitHub; these links point at the commit this page was built from.
Cpad PCB phob2: common questions
How big is the Cpad PCB phob2?
The Cpad PCB phob2 measures 31.6 × 54.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cpad PCB phob2?
14 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cpad PCB phob2 design files?
From the rana-sylvatica/c-pad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cpad PCB phob2 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which rana-sylvatica chose for the repository.
