9 open source boards using the MCP3202
Real designs built with the MCP3202, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PhobGCC 2 0 0 proto 1
PhobGCC
125.5 × 90.3 mm74 parts2LCERN-OHL-S-2.055RP2040/RP2350
Multislope-3I
NNNILabs
100 × 74 mm124 parts4LMIT43Cpad PCB phob2
rana-sylvatica
31.6 × 54.4 mm14 parts2LCERN-OHL-S-2.025LCSDR
licheegh
100 × 80 mm196 parts4LNo license7RP2040/RP2350
Jesnet proto 1
kje123
119.5 × 60.6 mm82 parts2LCERN-OHL-S-2.00SysWORXX Pi Hat-IO Simulator
ronaldsieber
65 × 56.5 mm22 parts2LMIT0Rfm adapter pi
fixxl
65 × 56.1 mm25 partsNo license10RP2040/RP2350
PhobGCC 2 0 0 proto 1
kje123
125.5 × 90.3 mm74 parts2LCERN-OHL-S-2.00Optical digitizer
jrleeman
114.3 × 33 mm21 parts4LNo license0
How designs wire the MCP3202
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MCP3202 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD/VREF pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF).
- The CH1 pin has a capacitor to GND on 5 of 8 designs, most often 47 nF (then 100 nF).
- The CH0 pin has a capacitor to GND on 4 of 8 designs, most often 47 nF (then 100 nF).
- The CH1 pin has a series resistor on 4 of 8 designs, most often 2 kΩ (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CH0pin 2 | Connected to: Signal 88% |
|
| CH1pin 3 | Connected to: Signal 100% |
|
| VSSpin 4 | Connected to: GND 88% | — |
| VDD/VREFpin 8 | Connected to: 3.3V 75% · a signal 25% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PhobGCC 2 0 0 proto 1 by PhobGCC, Multislope-3I by NNNILabs, Cpad PCB phob2 by rana-sylvatica and Rfm adapter pi by fixxl.
The MCP3202 in open source designs
The gallery holds 9 open source boards using the MCP3202 from 8 GitHub repositories; a typical one measures about 100 × 60.6 mm and carries around 74 components.
63% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is PhobGCC 2 0 0 proto 1 by PhobGCC.
Parts used alongside the MCP3202
Microcontrollers on boards using the MCP3202
What boards using the MCP3202 are built for
MCP3202: common questions
Where can I find a MCP3202 reference design?
Each of the 9 boards on this page is a real design using the MCP3202. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP3202 VDD/VREF pin?
The VDD/VREF pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the MCP3202.
How is the MCP3202 CH1 pin connected?
The CH1 pin has a capacitor to GND on 5 of 8 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MCP3202.
How is the MCP3202 CH0 pin connected?
The CH0 pin has a capacitor to GND on 4 of 8 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MCP3202.
What parts are used alongside the MCP3202?
The AMS1117-3.3, DRV5055A3XDBZXQ1, RP2040, USBLC6-2P6 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the MCP3202 use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the MCP3202?
The median is 100 × 60.6 mm, and 63% are two-layer designs.
What is the most popular open source board using the MCP3202?
By GitHub stars, PhobGCC 2 0 0 proto 1 by PhobGCC, with 55 stars.
Can I simulate one of these boards using the MCP3202 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.