Lora
rayho6240-arch·RocketCup-avionic-board-project·hardware/big_avionic/lora/lora.kicad_pcb
About the Lora PCB
Lora is an open source PCB design by rayho6240-arch, published on GitHub. It is a 4-layer board measuring 68 × 68 mm, with 18 components from 13 distinct parts.
Other key parts include the E22-400T30S and E80-900M23313S. By type, the board carries 7 capacitors, 4 resistors, 3 connectors, 2 ICs and 2 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
Aim to integrate the avionic board
歡迎來到成大 ISP 航電組的協作平台!這裡存放了我們為比賽設計的所有電路圖、PCB 檔案以及相關硬體參考資料。
為了方便大家協作、快速找到規格書,我們對專案資料夾進行了全面整合與邏輯分類。請大家開發前務必詳細閱讀以下指南。
我們採用結構化、模組化的資料夾配置。請在您負責的子專案資料夾內開發,並參考對應的規格書:
教學/教學624.md:最新完整版開發教學(三角色架構、板間鏈路與不對稱備援、雙鏈路遙測協定、地面站、主機端測試)。 PROJECTHISTORY.md:專案演進史,記錄重大決策與轉折的「為什麼」。 docs/:工程/規劃文件索引(硬體規格表、改進計劃、進度、設計筆記、需求驗證、測試方法)。
為了避免「悲劇」(檔案衝突或覆蓋),每次開工前請牢記口訣:「先拉,再做,後推」。
為什麼?** 這能把雲端最新的進度同步到你的電腦。如果不拉就改,上傳時會發生嚴重冲突。
Main components on the Lora
Lora bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E22-400T30S | XCVR_E22-900T30S | U1 |
| 1 | E80-900M23313S | E80-xxxM2213S | U2 |
| 1 | Conn_01x04 | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 2 | Conn_01x08 | JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal | J2, J3 |
| 1 | RED_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | TVS | D_SMA | D2 |
| 4 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C6 |
| 1 | 100u | CP_EIA-7343-31_Kemet-D_HandSolder | C2 |
| 1 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 470u | CP_EIA-7343-43_Kemet-X_HandSolder | C7 |
| 1 | 22ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Lora design files
The KiCad project lives in the rayho6240-arch/RocketCup-avionic-board-project repository on GitHub; these links point at the commit this page was built from.
Lora: common questions
How big is the Lora PCB?
The Lora measures 68 × 68 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Lora?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lora design files?
From the rayho6240-arch/RocketCup-avionic-board-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lora design in my own project?
The repository has no license, so all rights stay with rayho6240-arch. Use it as a reference, and ask the author before reusing the design.
More boards in RocketCup-avionic-board-project
STM32
SmallAvionic
rayho6240-arch
76.8 × 61.5 mm95 parts4LNo license0STM32
Second layer MCU
rayho6240-arch
68 × 68 mm94 parts4LNo license0STM32
Production MCU TOP 2 in 1
rayho6240-arch
137 × 80 mm94 parts4LNo license0STM32
GroundStation
rayho6240-arch
82.2 × 108.3 mm62 parts4LNo license0Power layer
rayho6240-arch
68 × 68 mm47 parts4LNo license0Deployment board
rayho6240-arch
54.5 × 49 mm42 parts4LNo license0Top layer
rayho6240-arch
68 × 68 mm21 parts4LNo license0
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Goodwatch30
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568