EmbeddedSystemsPhaseA

rconsi·-ENCE_3220_Class2023-·PhaseA/PhaseA_KiCAD_Files/EmbeddedSystemsPhaseA.kicad_pcb

EmbeddedSystemsPhaseA PCB layout, top view — open source STM32 board by rconsi

About the EmbeddedSystemsPhaseA PCB

EmbeddedSystemsPhaseA is an open source STM32 PCB design by rconsi, published on GitHub. It is a 2-layer board measuring 106.7 × 61 mm, with 21 components from 13 distinct parts.

Its main chip is the STM32F401VBTX, from the STM32 family. Other key parts include the 74HC595. By type, the board carries 12 resistors, 4 connectors, 2 ICs, 2 diodes and 1 speaker.

From the project

Contains all of the project files from the Embedded Systems I programming class

Main components on the EmbeddedSystemsPhaseA

STM32F401VBTX74HC595

EmbeddedSystemsPhaseA bill of materials (BOM)

21 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F401VBTX
CA56-12EWA
U1
1
74HC595
U2
1
CONN_02X10_ODD_EVEN
Power
J1
1
Digital/PWM
J2
1
Analog
J3
1
Digital/PWM
J4
1
Speaker
LS1
2
LED
D1, D2
1
10k
R1
1
330
10k
R2
2
330
R3, R4
1
330
100
R5
7
100
R6, R7, R8, R9, R10, R11, R12

EmbeddedSystemsPhaseA design files

The KiCad project lives in the rconsi/-ENCE_3220_Class2023- repository on GitHub; these links point at the commit this page was built from.

EmbeddedSystemsPhaseA: common questions

What microcontroller does the EmbeddedSystemsPhaseA use?

The EmbeddedSystemsPhaseA is built around the STM32F401VBTX, from the STM32 family.

How big is the EmbeddedSystemsPhaseA PCB?

The EmbeddedSystemsPhaseA measures 106.7 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EmbeddedSystemsPhaseA?

21 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EmbeddedSystemsPhaseA design files?

From the rconsi/-ENCE_3220_Class2023- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EmbeddedSystemsPhaseA design in my own project?

The repository has no license, so all rights stay with rconsi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EmbeddedSystemsPhaseA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in -ENCE_3220_Class2023-

Similar boards