Franzininho

Rdisrael·Franzininho

Franzininho PCB layout, top view — open source STM32 board by Rdisrael

About the Franzininho PCB

Franzininho is an open source STM32 PCB design by Rdisrael, published on GitHub. It is a 2-layer board measuring 74 × 74.1 mm, with 38 components from 17 distinct parts.

Its main chip is the FRANZININHO STM32 C0, from the STM32 family. Other key parts include the DVR8833 and PCF8574ADW. By type, the board carries 16 connectors, 12 resistors, 3 ICs, 2 diodes, 2 capacitors and 1 transistor.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Project of a robot using the Franzininho C0 board

This project still in development and many changes will be added to the projects

Main components on the Franzininho

FRANZININHO STM32 C0DVR8833PCF8574ADW

Franzininho bill of materials (BOM)

38 components, 17 distinct parts.

QtyPartRefs
1
FRANZININHO STM32 C0
U1
1
DVR8833
U2
1
PCF8574ADW
U4
1
BC817
Q1
1
Modulo WIFI ESP01
J1
1
Bluetooth ZS-040
J2
1
Display OLED 0.96''
J3
1
IMU MPU6050
J4
2
Screw_Terminal_01x02
J5, J6
2
Conn_01x06_Socket
J7, J8
8
Conn_01x04
J9, J10, J11, J12, J13, J14, J15, J16
1
Buzzer
BZ1
1
SW_DPDT_x2
SW2
2
WS2812B
D1, D2
2
C
C1, C2
1
470R
R1
11
R
R2, R3, R4, R5, R6, R7, R8, R9 +3

Franzininho design files

The KiCad project lives in the Rdisrael/Franzininho repository on GitHub; these links point at the commit this page was built from.

Franzininho: common questions

What microcontroller does the Franzininho use?

The Franzininho is built around the FRANZININHO STM32 C0, from the STM32 family.

How big is the Franzininho PCB?

The Franzininho measures 74 × 74.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Franzininho?

38 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Franzininho design files?

From the Rdisrael/Franzininho repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Franzininho design in my own project?

The repository has no license, so all rights stay with Rdisrael. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Franzininho without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards