IDEFlex
About the IDEFlex PCB
IDEFlex is an open source PCB design by Redherring32, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 106.1 × 55.1 mm, with 13 components from 6 distinct parts.
Other key parts include the IDE25. By type, the board carries 7 connectors, 5 resistors and 1 IC.
From the project
Fully portable original (2001) Xbox handheld using real hardware
Main components on the IDEFlex
IDEFlex bill of materials (BOM)
13 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IDE25 | IDE | U1 |
| 7 | Conn_01x04_Pin | EdgePad | J1, J2, J3, J4, J5, J6, J7 |
| 2 | 10K | R_0402_1005Metric | R1, R2 |
| 1 | 330R | R_0402_1005Metric | R3 |
| 1 | 1K | R_0402_1005Metric | R4 |
| 1 | 5.6K | R_0402_1005Metric | R5 |
IDEFlex design files
The KiCad project lives in the Redherring32/Xbox-Portable repository on GitHub; these links point at the commit this page was built from.
IDEFlex: common questions
How big is the IDEFlex PCB?
The IDEFlex measures 106.1 × 55.1 mm, has 2 copper layers and is 0.2224 mm thick.
How many components are on the IDEFlex?
13 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the IDEFlex design files?
From the Redherring32/Xbox-Portable repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IDEFlex design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which Redherring32 chose for the repository.
More boards in Xbox-Portable
Xbox-PMS
121.2 × 34.2 mm141 parts4LTAPR-OHL-1.093
S Controller
71.1 × 70.7 mm42 parts4LTAPR-OHL-1.093
USB-Termination
26.9 × 10.4 mm25 parts2LTAPR-OHL-1.093
XboxUSB-C
87.4 × 19.5 mm16 parts4LTAPR-OHL-1.093
LPC-Flex
49.2 × 67.2 mm3 parts2LTAPR-OHL-1.093