S Controller
About the S Controller PCB
S Controller is an open source PCB design by Redherring32, published on GitHub under the TAPR-OHL-1.0 license. It is a 4-layer board measuring 71.1 × 70.7 mm, with 42 components from 22 distinct parts.
Other key parts include the AT43USB353M-AC. By type, the board carries 12 switches, 12 resistors, 9 capacitors, 3 ICs, 3 connectors and 1 crystal.
From the project
Fully portable original (2001) Xbox handheld using real hardware
Main components on the S Controller
S Controller bill of materials (BOM)
42 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT43USB353M-AC | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | ~ | RKJXV1224-Socket | U2, U3 |
| 1 | 6MHz | Crystal_C38-LF_D3.0mm_L8.0mm_Vertical | Y1 |
| 2 | Conn_01x12_Pin | Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J1, J2 |
| 1 | USB_C_Receptacle_USB2.0 | GCT_USB4720-03-A_REVA | J3 |
| 2 | R_Potentiometer_Small | TRIGGER-R | RV1, RV2 |
| 6 | SW_Push | SW_TL3315NF100Q | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | SW_Push | DPADCONTACTS | SW7, SW8, SW9, SW10 |
| 2 | SW_Push | StartBack | SW11, SW12 |
| 1 | 2.2uF | C_0402_1005Metric | C1 |
| 2 | 50pF | C_0603_1608Metric | C10, C11 |
| 1 | 0.01uF | R_0402_1005Metric | C21 |
| 1 | 0.1nF | R_0402_1005Metric | C22 |
| 1 | 2.2uF | R_0402_1005Metric | C29 |
| 1 | 0.1uF | C_0603_1608Metric | C33 |
| 1 | 0.33uF | C_0603_1608Metric | C36 |
| 1 | 0.01uF | C_0402_1005Metric | C39 |
| 1 | 1.5K | R_0603_1608Metric | R1 |
| 2 | 5.1K | R_0402_1005Metric | R2, R3 |
| 2 | 27R | R_0603_1608Metric | R7, R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | R_0402_1005Metric | R14 |
| 6 | 4.7K | R_0603_1608Metric | R17, R18, R24, R25, R31, R32 |
S Controller design files
The KiCad project lives in the Redherring32/Xbox-Portable repository on GitHub; these links point at the commit this page was built from.
S Controller: common questions
How big is the S Controller PCB?
The S Controller measures 71.1 × 70.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the S Controller?
42 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the S Controller design files?
From the Redherring32/Xbox-Portable repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the S Controller design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which Redherring32 chose for the repository.
