Medium-Voltage-Probe

Retro-Fitt·Medium-Voltage-Probe·HV_PROBE/HV_PROBE.kicad_pcb

Medium-Voltage-Probe PCB layout, top view — open source board by Retro-Fitt

About the Medium-Voltage-Probe PCB

Medium-Voltage-Probe is an open source PCB design by Retro-Fitt, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 177 × 19.1 mm, with 15 components from 6 distinct parts.

By type, the board carries 7 capacitors, 7 resistors and 1 connector.

It belongs with the test & measurement designs in this gallery.

From the project

Medium Voltage Probe for Osciloscopes and Digital Multimeters

As a result of my old hardware fixing addiction, i poke CRT monitors occasionally so i was in a search of a probe with medium voltage capability, preferably above 15kV. Probes on market are too expensive for my taste so i decided to make my own.

C8 C7 R7 and R8 can be low voltage parts (Above 30V) high voltage endurance is not required.

Do not hold probe while measuring above 50V DC/AC signals. and do not %100 rely on epoxy filling or insulation of cables and case, everything is a conductor if voltage is enough.

Medium-Voltage-Probe, from the project README
From the project README

Medium-Voltage-Probe bill of materials (BOM)

15 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2837587
PROBE_BNC
J1
5
C342437
22pF 6kV
C1, C2, C3, C4, C5
2
C342758
2.2nF 3kV
C7, C8
5
C1364809
47MΩ 1W ±200ppm ±5%
R1, R2, R3, R4, R5
1
1MΩ
R7
1
C1365653
445kΩ (470kΩ Can be fitted)
R8

Medium-Voltage-Probe design files

The KiCad project lives in the Retro-Fitt/Medium-Voltage-Probe repository on GitHub; these links point at the commit this page was built from.

Medium-Voltage-Probe: common questions

How big is the Medium-Voltage-Probe PCB?

The Medium-Voltage-Probe measures 177 × 19.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Medium-Voltage-Probe?

15 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Medium-Voltage-Probe design files?

From the Retro-Fitt/Medium-Voltage-Probe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Medium-Voltage-Probe design in my own project?

Yes, under the terms of its GPL-3.0 license, which Retro-Fitt chose for the repository.

Similar boards