VIC-20-Reloaded
RichCini·VIC-20-Reloaded
About the VIC-20-Reloaded PCB
VIC-20-Reloaded is an open source PCB design by RichCini, published on GitHub. It is a 2-layer board measuring 263.1 × 136.6 mm, with 130 components from 69 distinct parts.
Other key parts include the 74LS08 and 2016. By type, the board carries 41 capacitors, 28 resistors, 18 inductors, 11 connectors, 3 ICs and 2 transistors.
From the project
Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.
Prior Release (1.1-002D): An error was introduced in this version as a result of rearranging the data bus lines lines on IC UF8 (74LS245). D4 (pin 4) and D5 (pin 5) were reversed. There is a picture (ECO001) which indicates a convenient place to cut two traces and cross-wire them. Will be fixed in the next version.
Main components on the VIC-20-Reloaded
VIC-20-Reloaded bill of materials (BOM)
130 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS08 | DIP-14_W7.62mm_Socket | U13 |
| 2 | N/A 2016 | DIP-24_W15.24mm_Socket | U14, U15 |
| 1 | 2SC1815 | TO-92 | Q1 |
| 1 | 2SC1959 | TO-92 | Q2 |
| 1 | 774-MP143 14.31818 MHz | Crystal_HC18-U_Vertical | Y1 |
| 1 | CONN_01X03 | PinHeader_1x03_P2.54mm_Vertical | CN1 |
| 1 | Chroma Disconnect | PinHeader_2x01_P2.54mm_Vertical | J201 |
| 1 | SVID_E | PinHeader_1x03_P2.54mm_Vertical | J202 |
| 1 | Conn_02x12_Odd_Even | PinHeader_2x12_P2.54mm_Vertical | J301 |
| 1 | CONN_02X12 MA156-12-2 | MA156-12-2 | P1 |
| 1 | CASSETTE | PinHeader_1x06_P2.54mm_Vertical | P2 |
| 1 | DIN6 | CUI_SDS-60J | P3 |
| 1 | DIN5 | CUI_SDS-50J | P4 |
| 1 | 307-044-524-202 EXPANSION | Sullins_02_22_Card_Edge_Connector | P6 |
| 1 | PJ-002AH POWER TIP+ | BarrelJack_Horizontal | P7 |
| 1 | CONN_01X20 | PinHeader_1x20_P2.54mm_Vertical | P8 |
| 1 | 530-5SF2.5-R 2.5A | FUSE_4527 | F2 |
| 1 | 633-M2022TXW41-DA Power | M2022TXW41DA | SW1 |
| 1 | Crystal Ground | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 2 | N/A 6522 | DIP-40_W15.24mm_Socket | UAB1, UAB3 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS06 7406 | DIP-14_W7.62mm_Socket | UB4 |
| 1 | LM555N | DIP-8_W7.62mm_Socket | UB6 |
| 1 | N/A 6560 | DIP-40_W15.24mm_Socket | UB7 |
| 1 | 7402 | DIP-14_W7.62mm_Socket | UB9 |
| 1 | 74LS04 | DIP-14_W7.62mm_Socket | UC2 |
| 1 | 74LS02 | DIP-14_W7.62mm_Socket | UC3 |
| 3 | 74LS138 | DIP-16_W7.62mm_Socket | UC4, UC5, UC6 |
| 1 | CD4066 4066 | DIP-14_W7.62mm_Socket | UD1 |
| 3 | 2114AL-3 2114 | DIP-18_W7.62mm_Socket | UD2, UE1, UE2 |
| 1 | N/A 2332 | DIP-24_W15.24mm_Socket | UD7 |
| 3 | 74LS245 | DIP-20_W7.62mm_Socket | UD8, UE8, UF8 |
| 1 | 74LS133 | DIP-16_W7.62mm_Socket | UD9 |
| 1 | 6502A | DIP-40_W15.24mm_Socket | UE10 |
| 2 | N/A 2364 | DIP-24_W15.24mm_Socket | UE11, UE12 |
| 7 | 2743001112 FILTER | L_Axial_L7.0mm_D3.3mm_P2.54mm_Vertical_Fastron_MICC | FB1, FB2, FB4, FB5, FB8, FB9, FB11 |
| 9 | 2743001112 FILTER | L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | FB3, FB6, FB7, FB10, FB12, FB13, FB14, FB15 +1 |
| 1 | 2.2UH 2.2uH | L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | L1 |
| 1 | 1.2UH 1.2uH | L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | L3 |
| 24 | K104K15X7RF53H5 0.1uF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C8, C10, C12, C16, C18 +16 |
| 2 | 581-TAP225M035SCS 2.2uF | CP_Radial_D5.0mm_P2.50mm | C4, C6 |
| 2 | 581-TAP474K035SCS 0.47uF | CP_Radial_D5.0mm_P2.50mm | C5, C7 |
| 1 | 0.01UF 0.01uF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C9 |
| 1 | UMA1H010MDD 1uF | CP_Radial_D4.0mm_P1.50mm | C11 |
| 1 | FG28C0G1H221JNT06 220pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C13 |
| 2 | 50ML10MEFC5X7 10uF | CP_Radial_D4.0mm_P1.50mm | C15, C42 |
| 1 | ESS476M016AC2AA 47uF | CP_Radial_D5.0mm_P2.00mm | C17 |
| 2 | 0.001uF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C20, C21 |
| 2 | 810-FG24X7R1H224KNT00 0.22uF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C31, C32 |
| 1 | 80-A750MW228M1CAAE10 1000uF | CP_Radial_D10.0mm_P5.00mm | C33 |
| 1 | GKG30015 20pF | C_Radial_D10.0mm_H12.5mm_P5.00mm | C48 |
| 1 | FG28C0G1H150JNT06 15pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C50 |
| 3 | 2.2KQ 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 330Q 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R6 |
| 2 | 560Q 560 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7, R28 |
| 2 | 1.0KQ 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8, R40 |
| 1 | 510Q 510 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9 |
| 1 | 652-3266W-1-102LF 1K | Potentiometer_Bourns_3266W_Vertical | R10 |
| 1 | 1.8KQ 1.8K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 2.7KQ 2.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12 |
| 1 | 270Q 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R13 |
| 1 | 180Q 180 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 6 | 1.0KQ 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R17, R18, R19, R26, R29 |
| 1 | 10.0KQ 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | 390Q 390 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 220KQ 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 150KQ 150K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
| 1 | 470Q 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R27 |
| 1 | 240Q 240 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R41 |
| 1 | 75Q 75 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R201 |
VIC-20-Reloaded design files
The KiCad project lives in the RichCini/VIC-20-Reloaded repository on GitHub; these links point at the commit this page was built from.
VIC-20-Reloaded: common questions
How big is the VIC-20-Reloaded PCB?
The VIC-20-Reloaded measures 263.1 × 136.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VIC-20-Reloaded?
130 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VIC-20-Reloaded design files?
From the RichCini/VIC-20-Reloaded repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VIC-20-Reloaded design in my own project?
The repository has no license, so all rights stay with RichCini. Use it as a reference, and ask the author before reusing the design.