251 open source boards using the 74LS08
Real designs built with the 74LS08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687Space Odyssey
jotego
49.6 × 78.3 mm22 parts2LGPL-3.0335Instruction
jes
237.5 × 102.9 mm110 parts2LUnlicense30168000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132Sch
DownUnderCTF
150 × 110 mm47 parts4LNo license115AVR/Arduino
C64-Switchless-Multi-Kernal-27C256-adapter
bwack
22.2 × 46.4 mm14 parts2LCERN-OHL-1.2112AVR/Arduino
TTY
KALTCHUK
99.7 × 69.9 mm43 parts2LNo license94- schematic only · 25 parts
Transputer
nanochess
25 partsBSD-3-Clause92 CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50LanguageCard
btb
100 × 77.5 mm37 parts2LApache-2.044Dueottosei
na103
138 × 108 mm85 parts4LCC-BY-NC-4.037HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Retroii
jonthomasson
330.2 × 215.9 mm295 parts4LNo license33Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32M68kcomp1
jtsiomb
159.5 × 99.8 mm50 parts2LCC-BY-SA-4.032Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT29OpenAmigaJoyMouseSwitcher
SukkoPera
66.8 × 73.5 mm29 parts2LCustom license26Diego 500 5 slot
CRG-Glen
195 × 140 mm131 parts4LCERN-OHL-S-2.025Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license20Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19Odyssey 2 rgb
abzman
83.3 × 78.2 mm70 parts2LUnlicense19Netholi
expeyes
80.2 × 72.3 mm210 partsNo license18MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17- schematic only · 124 parts
Arcade-IremM92 MiSTer
MiSTer-devel
124 partsGPL-2.017 Gb cartridge rom mbc ram
roybaer
50 × 61 mm18 parts2LNo license16- schematic only · 142 parts
Commodore-Vic-20
StormTrooper
142 partsNo license16 Tlcs90-rom reader
sergiopolog
111.8 × 121.9 mm54 parts2LGPL-3.015Intellivision t card
abzman
143 × 174.7 mm75 parts2LUnlicense12Coco9511pak
barberd
98.3 × 107.1 mm43 parts2LGPL-3.012Main
ceteras
299.2 × 180 mm352 parts2LMIT11CPC464-2MINI
Board-Folk
246.1 × 85 mm156 parts2LNo license10Neogeo diag mvs prog
jwestfall69
174 × 134 mm19 parts2LUnlicense10YN2413 MOTO
dinoflorenzi
61 × 69.9 mm32 parts2LNo license9
How designs wire the 74LS08
Read from the KiCad layouts of 162 open source designs, one per repository: what each pin of the 74LS08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 76 of 162 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 96% | — |
| VCCpin 14 | Connected to: 5V 94% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Commodore Plus 4 by baldengineer, Space Odyssey by jotego and Alu by jes.
The 74LS08 in open source designs
The gallery holds 251 open source boards using the 74LS08 from 177 GitHub repositories; a typical one measures about 142 × 100 mm and carries around 54 components.
82% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the 74LS08
Microcontrollers on boards using the 74LS08
What boards using the 74LS08 are built for
74LS08: common questions
Where can I find a 74LS08 reference design?
Each of the 251 boards on this page is a real design using the 74LS08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS08 VCC pin?
The VCC pin has a decoupling capacitor on 76 of 162 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 162 open source designs using the 74LS08.
What parts are used alongside the 74LS08?
The 74LS32, 74LS04, 74LS138, 74LS00 and 74LS245 appear in the most repositories here.
Which microcontrollers do boards using the 74LS08 use?
Most are built on AVR/Arduino (16), STM32 (2), ESP32 (1) and NXP (1).
How big is a typical board using the 74LS08?
The median is 142 × 100 mm, and 82% are two-layer designs.
What is the most popular open source board using the 74LS08?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the 74LS08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.