LaserDriverRGB
Rivercraft911·R-01_Raster_Laser_Projector·pcbs/LaserDriverRGB/LaserDriverRGB.kicad_pcb
About the LaserDriverRGB PCB
LaserDriverRGB is an open source PCB design by Rivercraft911, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 69 components from 18 distinct parts.
Other key parts include the MCP4728. By type, the board carries 34 resistors, 22 capacitors, 5 ICs, 3 diodes and 2 connectors.
From the project
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline. An IR sensor watches the facets go by and fires an interrupt, we measure how fast the mirror is spinning and then arm a timer to st
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline. An IR sensor watches the facets go by and fires an interrupt, we measure how fast the mirror is spinning and then arm a timer to start the raster when on screen. Timer goes off and we bitbang 320 pixels out the GPIO ports, then move the galvo in a specific pattern and do it 120 times. At the top of every frame we then swap framebuffers

Main components on the LaserDriverRGB
LaserDriverRGB bill of materials (BOM)
69 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ~ | QFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1, U2 |
| 3 | MCP4728 | MSOP-10_3x3mm_P0.5mm | U3, U4, U5 |
| 1 | SIGNAL | TE_3-1734839-0_1x30-1MP_P0.5mm_Horizontal | J1 |
| 1 | POWER | Molex_DuraClik_502352-0600_1x06-1MP_P2.00mm_Horizontal | J2 |
| 1 | GREEN | Molex_DuraClik_502352-0200_1x02-1MP_P2.00mm_Horizontal | LD1 |
| 1 | BLUE | Molex_DuraClik_502352-0200_1x02-1MP_P2.00mm_Horizontal | LD2 |
| 1 | RED | Molex_DuraClik_502352-0200_1x02-1MP_P2.00mm_Horizontal | LD3 |
| 3 | SS14 | D_SMA | D1, D2, D3 |
| 3 | 100UF 100uF | C_Radial_D5.0mm_H5.0mm_P2.00mm | C1, C2, C3 |
| 8 | 10UF 10uF | C_0805_2012Metric | C4, C5, C6, C20, C22, C32, C33, C34 |
| 8 | 0.1UF 0.1uF | C_0603_1608Metric | C7, C8, C9, C19, C21, C29, C30, C31 |
| 3 | 10NF 10nF | C_0603_1608Metric | C10, C11, C12 |
| 3 | 0.1 | R_1210_3225Metric | R1, R2, R3 |
| 12 | 10K 10k | R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 +4 |
| 2 | 1 | R_0603_1608Metric | R16, R17 |
| 2 | 10K | R_0603_1608Metric | R18, R19 |
| 12 | 1k | R_0603_1608Metric | R20, R21, R22, R23, R24, R25, R26, R27 +4 |
| 3 | 100K 100k | R_0603_1608Metric | R32, R33, R34 |
LaserDriverRGB design files
The KiCad project lives in the Rivercraft911/R-01_Raster_Laser_Projector repository on GitHub; these links point at the commit this page was built from.
LaserDriverRGB: common questions
How big is the LaserDriverRGB PCB?
The LaserDriverRGB measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LaserDriverRGB?
69 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LaserDriverRGB design files?
From the Rivercraft911/R-01_Raster_Laser_Projector repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LaserDriverRGB design in my own project?
The repository has no license, so all rights stay with Rivercraft911. Use it as a reference, and ask the author before reusing the design.