Ps1-port tap

rixnobis·ps1-port-tap

Ps1-port tap PCB layout, top view — open source board by rixnobis

About the Ps1-port tap PCB

Ps1-port tap is an open source PCB design by rixnobis, published on GitHub. It is a 2-layer board measuring 40 × 51 mm, with 11 components from 5 distinct parts.

By type, the board carries 8 resistors and 3 connectors.

It belongs with the test & measurement designs in this gallery.

From the project

PS1 controller/memory card port pass-through with a logic analyser tap (KiCad)

A pass-through for one PlayStation controller or memory card port, with every line broken out to a 0.1" header for a logic analyser. Cut a controller extension cable in half, solder the console half to J1 and the device half to J2, and clip the analyser onto J3.

The PS1 port connector is proprietary, and I could not find a published drawing of it I would trust. The best public source is a forum post giving a 4 mm pitch, but its author traced the positions from a scaled photo. So this revision has no connector on the board: J1 and J2 are 1x10 rows at 2.54 mm with 1.0 mm holes, big enough for…

Ps1-port tap, from the project README
From the project README

Ps1-port tap bill of materials (BOM)

11 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONSOLE
J1
1
DEVICE
J2
1
LA_TAP
J3
6
100
R1, R2, R5, R6, R7, R8
2
10K
10k
R3, R4

Ps1-port tap design files

The KiCad project lives in the rixnobis/ps1-port-tap repository on GitHub; these links point at the commit this page was built from.

Ps1-port tap: common questions

How big is the Ps1-port tap PCB?

The Ps1-port tap measures 40 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ps1-port tap?

11 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ps1-port tap design files?

From the rixnobis/ps1-port-tap repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ps1-port tap design in my own project?

The repository has no license, so all rights stay with rixnobis. Use it as a reference, and ask the author before reusing the design.

Similar boards