CANBOARD REV3
About the CANBOARD REV3 PCB
CANBOARD REV3 is an open source AVR/Arduino PCB design by RoanTractor, published on GitHub. It is a 2-layer board measuring 85 × 65 mm, with 19 components from 11 distinct parts.
Its main chip is the Arduino_Nano_ESP32_Socket, from the AVR/Arduino family. By type, the board carries 9 resistors, 7 connectors, 1 module, 1 fuse and 1 diode.
From the project
Tractor team electrical , experts in killing electrical gremlins and using black powder.
To learn how to contribute Head to Introduction and read the Introduction To Git
Main components on the CANBOARD REV3
CANBOARD REV3 bill of materials (BOM)
19 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_ESP32_Socket | Arduino_Nano_ESP32_Socket | A1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 2 | Conn_01x08_Male | TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J2, J3 |
| 1 | PC847X5J000F | DIP-16_W7.62mm_LongPads | J4 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | Conn_01x04_Male | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J8 |
| 1 | 3568 | FUSE_3568 | F2 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 8 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9 |
CANBOARD REV3 design files
The KiCad project lives in the RoanTractor/Tractor-Team-EL repository on GitHub; these links point at the commit this page was built from.
CANBOARD REV3: common questions
What microcontroller does the CANBOARD REV3 use?
The CANBOARD REV3 is built around the Arduino_Nano_ESP32_Socket, from the AVR/Arduino family.
How big is the CANBOARD REV3 PCB?
The CANBOARD REV3 measures 85 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CANBOARD REV3?
19 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CANBOARD REV3 design files?
From the RoanTractor/Tractor-Team-EL repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CANBOARD REV3 design in my own project?
The repository has no license, so all rights stay with RoanTractor. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CANBOARD REV3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Tractor-Team-EL
Earlier revisions in the repo: CANBOARD_REV2, CANBOARD_REV1
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746