Stm32f429-handheld

RobbieVanZante·stm32f429-handheld-pcb·console/console.kicad_pcb

Stm32f429-handheld PCB layout, top view — open source STM32 board by RobbieVanZante

About the Stm32f429-handheld PCB

Stm32f429-handheld is an open source STM32 PCB design by RobbieVanZante, published on GitHub. It is a 2-layer board measuring 174 × 108 mm, with 14 components from 14 distinct parts.

Its main chip is the STM32F429I_DISC1_Module, from the STM32 family. Other key parts include the TP4056_Module and S7V8A_Module. By type, the board carries 7 switches, 3 ICs, 2 resistors, 1 buzzer and 1 diode.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

Hardware for a bare-metal handheld games console: a carrier board that turns an STM32F429I-DISC1 dev board into a battery-powered handheld, plus a 3D-printed shell.

Hardware for a bare-metal handheld games console: a carrier board that turns an STM32F429I-DISC1 dev board into a battery-powered handheld, plus a 3D-printed shell.

The firmware that runs on it — a small game engine and nine games — lives in stm32f429-handheld.

Designed in KiCad, shell modelled off the exported board outline. Rev A has been fabricated, assembled, and fitted into the printed shell.

Stm32f429-handheld, from the project README
From the project README

Main components on the Stm32f429-handheld

STM32F429I_DISC1_ModuleTP4056_ModuleS7V8A_Module

Stm32f429-handheld bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
STM32F429I_DISC1_Module
U1
1
TP4056_Module
U2
1
S7V8A_Module
U3
1
Buzzer
BZ1
1
SW_DIP_x01
SW1
1
BTN_B
SW2
1
BTN_A
SW3
1
BTN_RIGHT
SW4
1
BTN_UP
SW5
1
BTN_DOWN
SW6
1
BTN_LEFT
SW7
1
D_Schottky
D1
1
10k
R1
1
39k
R2

Stm32f429-handheld design files

The KiCad project lives in the RobbieVanZante/stm32f429-handheld-pcb repository on GitHub; these links point at the commit this page was built from.

Stm32f429-handheld: common questions

What microcontroller does the Stm32f429-handheld use?

The Stm32f429-handheld is built around the STM32F429I_DISC1_Module, from the STM32 family.

How big is the Stm32f429-handheld PCB?

The Stm32f429-handheld measures 174 × 108 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32f429-handheld?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32f429-handheld design files?

From the RobbieVanZante/stm32f429-handheld-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm32f429-handheld design in my own project?

The repository has no license, so all rights stay with RobbieVanZante. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32f429-handheld without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards