HardLabs

Routing board

robertpuccinelli·pcb_czb·Biofilms_PCB/routing_board.kicad_pcb

Routing board layout, top view — open source AVR/Arduino board by robertpuccinelli

About the Routing board

Routing board is an open source AVR/Arduino PCB design by robertpuccinelli, published on GitHub. It is a 2-layer board measuring 53.3 × 66 mm, with 35 components from 20 distinct parts.

Its main chip is the Arduino TL, from the AVR/Arduino family. By type, the board carries 13 connectors, 10 resistors, 9 diodes, 2 transistors and 1 switch.

From the project

Random PCB designs from mini projects at czb

Routing board bill of materials (BOM)

35 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Q_NPN_Darlington_BCE
Q1
1
Q_PNP_BEC
Q2
1
Arduino TL
J1
1
Arduino BL
J2
1
Motor Power
J3
1
Arduino TR
J4
1
Arduino BR
J5
1
Servo
J6
1
Motor Driver
J7
1
Limit Switch
J8
1
Arduino Power Out
J9
1
Solenoid
J10
1
Analog In
J11
1
DC PWR
J12
1
Digital Out
J13
1
Dip_Switch_3
S1
8
LED
D1, D3, D4, D5, D6, D7, D8, D9
1
D
D2
8
2.5k
R1, R3, R4, R5, R6, R7, R8, R10
2
150k
R2, R9

Routing board design files

The KiCad project lives in the robertpuccinelli/pcb_czb repository on GitHub; these links point at the commit this page was built from.

Routing board: common questions

What microcontroller does the Routing board use?

The Routing board is built around the Arduino TL, from the AVR/Arduino family.

How big is the Routing board?

The Routing board measures 53.3 × 66 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Routing board?

35 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Routing board design files?

From the robertpuccinelli/pcb_czb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Routing board design in my own project?

The repository has no license, so all rights stay with robertpuccinelli. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Routing board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in pcb_czb

Similar boards