Capper Decapper
About the Capper Decapper PCB
Capper Decapper is an open source PCB design by robertpuccinelli, published on GitHub. It is a 4-layer board measuring 77.5 × 42.5 mm, with 84 components from 53 distinct parts.
Other key parts include the DRV8833RTY, MCP3008, CBT3245A, INA4180 and 74LVC2G14. By type, the board carries 37 capacitors, 21 resistors, 19 ICs, 3 connectors, 2 diodes and 1 transistor.
From the project
Random PCB designs from mini projects at czb
Main components on the Capper Decapper
Capper Decapper bill of materials (BOM)
84 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8833RTY INA214 | SOT-363_SC-70-6 | U1, U4 |
| 1 | DRV8833RTY 74AHC08 | PVQFN-14 | U2 |
| 1 | DRV8833RTY | WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U3 |
| 1 | MCP3008 INA214 | SOT-363_SC-70-6 | U5 |
| 1 | CBT3245A 74AHC08 | PVQFN-14 | U6 |
| 1 | CBT3245A DRV8833RTY | WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U7 |
| 2 | INA4180 INA214 | SOT-363_SC-70-6 | U8, U9 |
| 1 | 74LVC2G14 74AHC08 | PVQFN-14 | U10 |
| 1 | AP6503 DRV8833RTY | WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U11 |
| 1 | AP6503 INA214 | SOT-363_SC-70-6 | U12 |
| 2 | INA214 | SOT-363_SC-70-6 | U13, U18 |
| 1 | V7805-1500R | TO-252-3_TabPin2 | U14 |
| 1 | 74AHC08 | PVQFN-14 | U15 |
| 1 | DRV8833RTY | WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U16 |
| 1 | MAX6018BEUR16 | SOT-23 | U17 |
| 1 | AP1501A | TO-263-5_TabPin3 | U19 |
| 1 | Q_NMOS_GSD | SOT-23 | Q1 |
| 1 | STEPPER_I2C Pi Control Signals | PinSocket_1x24_P2.54mm_Vertical | J1 |
| 1 | Motor_Power | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | Screw_Term | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Schottky | D_SMA | D1, D2 |
| 1 | 10UH 22uH | L_Wuerth_HCI-1365 | L1 |
| 3 | 2.2UF 22nF | C_0603_1608Metric | C1, C3, C7 |
| 3 | 10UF 0.1uF | C_0603_1608Metric | C2, C6, C8 |
| 1 | 10UF 2.2uF | C_0603_1608Metric | C4 |
| 1 | 2.2UF 10nF | C_0603_1608Metric | C5 |
| 1 | 10NF 22nF | C_0603_1608Metric | C9 |
| 1 | 10NF 2.2uF | C_0603_1608Metric | C10 |
| 2 | 10NF 10nF | C_0603_1608Metric | C11, C18 |
| 2 | 10NF 0.1uF | C_0603_1608Metric | C12, C19 |
| 2 | 100NF 22nF | C_0603_1608Metric | C13, C15 |
| 1 | 100NF 0.1uF | C_0603_1608Metric | C14 |
| 1 | 100NF 2.2uF | C_0603_1608Metric | C16 |
| 1 | 100NF 10uF | CP_EIA-3528-12_Kemet-T | C17 |
| 1 | 22UF 10uF | CP_EIA-3528-12_Kemet-T | C20 |
| 1 | 22UF 0.33uF | C_0603_1608Metric | C21 |
| 2 | 6.8NF 22nF | C_0603_1608Metric | C22, C24 |
| 1 | 6.8NF 0.1uF | C_0603_1608Metric | C23 |
| 1 | 6.8NF 2.2uF | C_0603_1608Metric | C25 |
| 1 | 100NF 0.01uF | C_0603_1608Metric | C26 |
| 1 | 100NF 10nF | C_0603_1608Metric | C27 |
| 6 | 0.1uF | C_0603_1608Metric | C28, C29, C34, C35, C36, C37 |
| 4 | 10uF | CP_EIA-3528-12_Kemet-T | C30, C31, C32, C33 |
| 1 | 50K 0.05R | R_1206_3216Metric | R1 |
| 1 | 50K 20k | R_0603_1608Metric | R2 |
| 2 | 50K 330R | R_0603_1608Metric | R3, R4 |
| 3 | 47M 20k | R_0603_1608Metric | R5, R8, R9 |
| 4 | 47M 0.05R | R_1206_3216Metric | R6, R7, R10, R12 |
| 1 | 47M 5k | R_0603_1608Metric | R11 |
| 4 | 20k | R_0603_1608Metric | R13, R14, R17, R18 |
| 3 | 0.05R | R_1206_3216Metric | R15, R16, R19 |
| 1 | 14.2K | R_0603_1608Metric | R20 |
| 1 | 2K | R_0603_1608Metric | R21 |
Capper Decapper design files
The KiCad project lives in the robertpuccinelli/pcb_czb repository on GitHub; these links point at the commit this page was built from.
Capper Decapper: common questions
How big is the Capper Decapper PCB?
The Capper Decapper measures 77.5 × 42.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Capper Decapper?
84 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capper Decapper design files?
From the robertpuccinelli/pcb_czb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Capper Decapper design in my own project?
The repository has no license, so all rights stay with robertpuccinelli. Use it as a reference, and ask the author before reusing the design.
