RoboBallersLine
About the RoboBallersLine PCB
RoboBallersLine is an open source PCB design by RoboBallers, published on GitHub. It is a 2-layer board measuring 132 × 132 mm, with 116 components from 18 distinct parts.
Other key parts include the MCP3008, BoostConverter, NSL-32 and Solenoid-Electric. By type, the board carries 56 resistors, 49 diodes, 7 ICs, 2 transistors, 1 connector and 1 capacitor.
Main components on the RoboBallersLine
RoboBallersLine bill of materials (BOM)
116 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MCP3008 | DIP-16_W7.62mm_Socket | U1, U2, U3 |
| 1 | BoostConverter | Boost_Convertor_LM2577 | U4 |
| 2 | NSL-32 | DIP-4_W7.62mm | U5, U6 |
| 1 | Solenoid-Electric | KickerPad | U7 |
| 1 | P-Channel | TO-220-3_Vertical | Q1 |
| 1 | N-Channel | TO-220-3_Vertical | Q2 |
| 1 | FTSH-105-01-L-DV-K Bottom PCB Samtec Inc. | IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 24 | LED | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +16 |
| 24 | D_Photo | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | D25, D26, D27, D28, D29, D30, D31, D32 +16 |
| 1 | Diode | D_DO-201AD_P12.70mm_Horizontal | D49 |
| 1 | 80v 2200uf | CP_Radial_D25.0mm_P10.00mm_SnapIn | C1 |
| 4 | 10K 10k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1, R18, R27, R56 |
| 23 | 750 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R4, R5, R6, R8, R9, R10 +15 |
| 1 | 165 750 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R7 |
| 24 | 14K 14k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R28, R29, R30, R31, R32, R33, R34, R35 +16 |
| 1 | 5k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R52 |
| 1 | 19K 19k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R53 |
| 2 | 210 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R54, R55 |
RoboBallersLine design files
The KiCad project lives in the RoboBallers/RoboBallersLinePCB repository on GitHub; these links point at the commit this page was built from.
RoboBallersLine: common questions
How big is the RoboBallersLine PCB?
The RoboBallersLine measures 132 × 132 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RoboBallersLine?
116 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RoboBallersLine design files?
From the RoboBallers/RoboBallersLinePCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RoboBallersLine design in my own project?
The repository has no license, so all rights stay with RoboBallers. Use it as a reference, and ask the author before reusing the design.