RB0006-USB-C-Maestro
RoboticsBrno·RB0006-USB-C-Maestro
About the RB0006-USB-C-Maestro PCB
RB0006-USB-C-Maestro is an open source PCB design by RoboticsBrno, published on GitHub. It is a 2-layer board measuring 42.7 × 29 mm, with 26 components from 13 distinct parts.
Other key parts include the MCP1804x-3302xMB and LM339. By type, the board carries 12 resistors, 6 connectors, 3 capacitors, 2 ICs, 2 diodes and 1 inductor.
Main components on the RB0006-USB-C-Maestro
RB0006-USB-C-Maestro bill of materials (BOM)
26 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1804x-3302xMB | SOT-89-3 | U1 |
| 1 | LM339 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | USB_C_Receptacle | USB_C_Receptable_JAE_DX07S016JA1 | J1 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x09_Male | PinHeader_1x09_P2.54mm_Vertical | J3 |
| 2 | Conn_01x01_Female | banana | J4, J5 |
| 1 | USB_C_Plug | HIROSE_CX60-24S-UNIT | P1 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | FerriteBead_Small | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 3 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 9 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5, R6, R8, R9, R10, R11 +1 |
| 1 | 10m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7 |
RB0006-USB-C-Maestro design files
The KiCad project lives in the RoboticsBrno/RB0006-USB-C-Maestro repository on GitHub; these links point at the commit this page was built from.
- Layoutmaestro.kicad_pcb
RB0006-USB-C-Maestro: common questions
How big is the RB0006-USB-C-Maestro PCB?
The RB0006-USB-C-Maestro measures 42.7 × 29 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the RB0006-USB-C-Maestro?
26 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the RB0006-USB-C-Maestro design files?
From the RoboticsBrno/RB0006-USB-C-Maestro repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RB0006-USB-C-Maestro design in my own project?
The repository has no license, so all rights stay with RoboticsBrno. Use it as a reference, and ask the author before reusing the design.