Output.rs485 usb adapter panel
About the Output.rs485 usb adapter panel PCB
Output.rs485 usb adapter panel is an open source PCB design by Roboy, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 88 × 69 mm, with 19 components from 15 distinct parts.
Other key parts include the LTC2855CDEPBF and FT232RL. By type, the board carries 4 connectors, 4 capacitors, 3 resistors, 2 ICs, 2 diodes and 1 inductor.
From the project
next level motorboard
Main components on the Output.rs485 usb adapter panel
Output.rs485 usb adapter panel bill of materials (BOM)
19 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC2855CDEPBF | ltc2855 | U1 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | USB_OTG | USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | RF_Shield_Two_Pieces | Laird_Technologies_BMI-S-201-F_13.66x12.70mm | J2 |
| 1 | uart | TE-Connectivity_Micro-Match_connector_02x02_Pitch_1.27mm | J3 |
| 1 | diff_uart | TE-Connectivity_Micro-Match_connector_02x03_Pitch_1.27mm | J4 |
| 1 | ears | R1_ear_silk_5.5mm | H3 |
| 1 | eyes | R1_eyes_mask_5.5mm | H4 |
| 1 | face | R1_face_mask_5.5mm | H5 |
| 2 | LED | LED_0402_1005Metric | D1, D2 |
| 1 | Ferrite_Bead_Small | R_0402_1005Metric | L1 |
| 3 | 0.1uF | C_0402_1005Metric | C1, C2, C4 |
| 1 | 10nF | C_0402_1005Metric | C3 |
| 1 | 10k | R_0402_1005Metric | R4 |
| 2 | 1k | R_0402_1005Metric | R5, R6 |
Output.rs485 usb adapter panel design files
The KiCad project lives in the Roboy/iceboard repository on GitHub; these links point at the commit this page was built from.
Output.rs485 usb adapter panel: common questions
How big is the Output.rs485 usb adapter panel PCB?
The Output.rs485 usb adapter panel measures 88 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Output.rs485 usb adapter panel?
19 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Output.rs485 usb adapter panel design files?
From the Roboy/iceboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Output.rs485 usb adapter panel design in my own project?
Yes, under the terms of its BSD-3-Clause license, which Roboy chose for the repository.
More boards in iceboard
FPGAOutput.panel 3x3
217 × 139 mm129 parts4LBSD-3-Clause4
FPGAPanel 3x3
217 × 139 mm129 parts4LBSD-3-Clause4
FPGABoard
65 × 39 mm128 parts4LBSD-3-Clause4
Rs485 usb adapter
37.1 × 17 mm24 parts2LBSD-3-Clause4
Rs485 usb adapter panel
88 × 69 mm19 parts2LBSD-3-Clause4
Output.rs485 adapter panel
68 × 69 mm14 parts2LBSD-3-Clause4
Rs485 adapter panel
68 × 69 mm14 parts2LBSD-3-Clause4
Rs485 adapter
27.2 × 17.4 mm14 parts2LBSD-3-Clause4
Differential uart
41 × 20 mm11 parts2LBSD-3-Clause4
Position encoder
52 × 29 mm10 parts2LBSD-3-Clause4
Rs422
42 × 46 mm8 parts2LBSD-3-Clause4