Control panel
Roboy·VRpuppet·hardware/control_panel/control_panel.kicad_pcb
About the Control panel PCB
Control panel is an open source PCB design by Roboy, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 119 × 96 mm, with 28 components from 22 distinct parts.
By type, the board carries 21 connectors and 7 diodes.
From the project
An actor struggles to die onstage, but a puppet has to struggle to live
Control panel bill of materials (BOM)
28 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | up_motor0 | SW_PUSH_6mm_H7.3mm | J1 |
| 1 | down_motor0 | SW_PUSH_6mm_H7.3mm | J2 |
| 1 | home_motor0 | SW_PUSH_6mm_H7.3mm | J3 |
| 1 | Conn_01x23_Male | PinHeader_1x23_P2.54mm_Vertical | J4 |
| 1 | up_motor1 | SW_PUSH_6mm_H7.3mm | J5 |
| 1 | down_motor1 | SW_PUSH_6mm_H7.3mm | J6 |
| 1 | home_motor1 | SW_PUSH_6mm_H7.3mm | J7 |
| 1 | up_motor2 | SW_PUSH_6mm_H7.3mm | J8 |
| 1 | down_motor2 | SW_PUSH_6mm_H7.3mm | J9 |
| 1 | home_motor2 | SW_PUSH_6mm_H7.3mm | J10 |
| 1 | up_motor3 | SW_PUSH_6mm_H7.3mm | J11 |
| 1 | down_motor3 | SW_PUSH_6mm_H7.3mm | J12 |
| 1 | home_motor3 | SW_PUSH_6mm_H7.3mm | J13 |
| 1 | up_motor4 | SW_PUSH_6mm_H7.3mm | J14 |
| 1 | down_motor4 | SW_PUSH_6mm_H7.3mm | J15 |
| 1 | home_motor4 | SW_PUSH_6mm_H7.3mm | J16 |
| 1 | up_motor5 | SW_PUSH_6mm_H7.3mm | J17 |
| 1 | down_motor5 | SW_PUSH_6mm_H7.3mm | J18 |
| 1 | home_motor5 | SW_PUSH_6mm_H7.3mm | J19 |
| 1 | EMERGENCY | PinHeader_1x02_P2.54mm_Vertical | J20 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ON/OFF | PinHeader_1x02_P2.54mm_Vertical | J21 |
| 7 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D3, D4, D5, D6, D7 |
Control panel design files
The KiCad project lives in the Roboy/VRpuppet repository on GitHub; these links point at the commit this page was built from.
Control panel: common questions
How big is the Control panel PCB?
The Control panel measures 119 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Control panel?
28 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Control panel design files?
From the Roboy/VRpuppet repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Control panel design in my own project?
Yes, under the terms of its BSD-3-Clause license, which Roboy chose for the repository.