Esim
Roland-Scholz·esim·kicad/esim/esim.kicad_pcb
About the Esim PCB
Esim is an open source PCB design by Roland-Scholz, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 19 components from 11 distinct parts.
Other key parts include the AT89x51xxP, CY62256-70PC and 74LS245. By type, the board carries 6 ICs, 6 capacitors, 4 resistors, 1 crystal, 1 connector and 1 switch.
Main components on the Esim
Esim bill of materials (BOM)
19 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT89x51xxP | DIP-40_W15.24mm | U1 |
| 2 | CY62256-70PC | DIP-28_W15.24mm | U2, U3 |
| 3 | 74LS245 | DIP-20_W7.62mm_LongPads | U4-ADRLO1, U5-ADRHI1, U6-DATA1 |
| 1 | 22.1184Mhz | Crystal_HC49-U_Vertical | Y1 |
| 1 | GND + TXD RXD | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 2 | 30nf | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 3 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5, C6 |
| 3 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 10k | R_Array_SIP9 | RN1 |
Esim design files
The KiCad project lives in the Roland-Scholz/esim repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/esim/esim.kicad_pcb
- Schematickicad/esim/esim.kicad_sch
Esim: common questions
How big is the Esim PCB?
The Esim measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esim?
19 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esim design files?
From the Roland-Scholz/esim repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esim design in my own project?
The repository has no license, so all rights stay with Roland-Scholz. Use it as a reference, and ask the author before reusing the design.