278 open source boards using the 74LS245
Real designs built with the 74LS245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687Raemixx500
SukkoPera
365.8 × 254 mm349 parts2LNo license313AVR/Arduino
M8SBC-486
maniekx86
150 × 150 mm123 parts4LNo license253Multi
homebrew8088
243.8 × 172.7 mm85 parts2LGPL-3.0238Raspberry Pi
Apple2-IO-RPi
tjboldt
89.5 × 77.5 mm24 parts2LMIT138AVR/Arduino
TTY
KALTCHUK
99.7 × 69.9 mm43 parts2LNo license94- schematic only · 25 parts
Transputer
nanochess
25 partsBSD-3-Clause92 SNES-FeRAM-Cart
soniccd123
98.5 × 79.5 mm19 parts2LNo license87Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78Amiga-1000-Rejuvenator
joethezombie
241.8 × 174.8 mm120 parts4LCERN-OHL-S-2.057PIC
.C68
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50ES688 ISA8
hkzlab
104.1 × 99.1 mm121 parts4LCC-BY-NC-4.04680ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042RP2040/RP2350
Pico Interface One
derekfountain
100 × 99.9 mm32 parts4LGPL-2.041HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Isa opl2
skiselev
104.1 × 73.7 mm61 partsNo license36Tandy1000ex hx ram
misterblack1
57.2 × 84.5 mm17 parts2LNo license36Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32ZX Interface 2021
tebl
87.6 × 100 mm56 parts2LCERN-OHL-1.232IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license318-bit computer Buss
xrayer2000
110.5 × 105.4 mm113 parts2LCC-BY-NC-4.030Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT29Multi
homebrew8088
184.2 × 219.2 mm92 parts2LGPL-3.027SegaCD Ramcart
WindDrake
83.8 × 61.5 mm20 parts2LNo license27- schematic only · 84 parts
Commodore-PC10-III-Reproduction
Board-Folk
84 partsNo license27 Diego 500 5 slot
CRG-Glen
195 × 140 mm131 parts4LCERN-OHL-S-2.025AVR/Arduino
Cart
digilogistist
100 × 61.5 mm38 parts2LCC0-1.024- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 - schematic only · 32 parts
Digicard-D-Net
markadev
32 parts2LNo license23 - schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 New enet
jayacotton
254 × 134.6 mm36 parts2LMIT21Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20
How designs wire the 74LS245
Read from the KiCad layouts of 162 open source designs, one per repository: what each pin of the 74LS245 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 84 of 161 designs, most often 100 nF (then 330 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 98% | — |
| VCCpin 20 | Connected to: 5V 94% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, ROM Emulator by MicroCoreLabs, Raemixx500 by SukkoPera and M8SBC-486 by maniekx86.
The 74LS245 in open source designs
The gallery holds 278 open source boards using the 74LS245 from 174 GitHub repositories; a typical one measures about 119.4 × 100 mm and carries around 49 components.
79% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the 74LS245
Microcontrollers on boards using the 74LS245
What boards using the 74LS245 are built for
74LS245: common questions
Where can I find a 74LS245 reference design?
Each of the 278 boards on this page is a real design using the 74LS245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS245 VCC pin?
The VCC pin has a decoupling capacitor on 84 of 161 designs, most often 100 nF (then 330 nF). Counted from the KiCad layouts of 162 open source designs using the 74LS245.
What parts are used alongside the 74LS245?
The 74LS04, 74LS32, 74LS138, 74LS00 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS245 use?
Most are built on AVR/Arduino (19), RP2040/RP2350 (6), NXP (3) and PIC (3).
How big is a typical board using the 74LS245?
The median is 119.4 × 100 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74LS245?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the 74LS245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.