Phobia
rombrew·phobia-pcb
About the Phobia PCB
Phobia is an open source STM32 PCB design by rombrew, published on GitHub under the CC-BY-SA-4.0 license. It is a 8-layer board measuring 82.6 × 55.3 mm, with 165 components from 57 distinct parts.
Its main chip is the STM32F405RG, from the STM32 family. Other key parts include the AD8418 and AD8539. By type, the board carries 66 capacitors, 60 resistors, 9 connectors, 8 modules, 7 transistors and 4 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
Phobia PCB design files
This repository contains schematic and printed circuit board design files of the PMC. There is KiCad project. Refer to the PMC repository for details.
Main components on the Phobia
Phobia bill of materials (BOM)
165 components, 57 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AD8418 | SOIC-8 | U1, U2 |
| 2 | AD8539 | MSOP-8 | U3, U4 |
| 1 | TPS61040 | SOT-23-5 | M1 |
| 1 | LM5164 | PDSO-8 | M2 |
| 1 | STM32F405RG | LQFP-64 | M3 |
| 1 | TPS73633 | SOT-23-5 | M4 |
| 3 | UCC27211A | SON-8 | M5, M6, M7 |
| 1 | SN65HVD256 | SOIC-8 | M8 |
| 6 | IPT010N08NM5 | PG-HSOF-8 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | IRLML6401 | SOT-23 | Q7 |
| 1 | USART | PLS-4 | P1 |
| 1 | SWD | PLS-2 | P2 |
| 1 | HALL | PLS-5 | P3 |
| 1 | SPI | PLS-6 | P4 |
| 1 | PPM | PLS-4 | P5 |
| 1 | ANALOG | PLS-4 | P6 |
| 1 | FAN | PLS-2 | P7 |
| 1 | NTC | PLS-2 | P8 |
| 1 | CAN | PLS-2 | P9 |
| 5 | PAD4 | PLS-1 | N1, N2, N3, N4, N5 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12MHZ 12 MHz | SM-Z3225 | Z1 |
| 1 | LED | SM-0603 | D1 |
| 1 | NSR0320 | SM-0805 | D2 |
| 1 | 1N4448WS | SM-0805 | D3 |
| 1 | 10UH 10uH | COIL-3 | L1 |
| 1 | 22UH 22uH | COIL-8 | L2 |
| 2 | 2.2uF 100v | SM-1210 | C1, C3 |
| 5 | 4.7uF 16v | SM-0805 | C2, C23, C24, C26, C31 |
| 23 | 0.1uF 25v | SM-0603 | C4, C6, C14, C16, C18, C25, C27, C32 +15 |
| 1 | 0.1uF 100v | SM-0805 | C5 |
| 9 | 0.01uF 25v | SM-0603 | C7, C8, C20, C28, C29, C30, C37, C38 +1 |
| 2 | 12PF 12pF | SM-0603 | C9, C13 |
| 1 | 10uF 25v | SM-1210 | C10 |
| 1 | 2.2nF 50v | SM-0805 | C11 |
| 2 | 180PF 180pF | SM-0603 | C15, C19 |
| 5 | 1uF 25v | SM-0805 | C17, C41, C43, C45, C60 |
| 2 | 47uF 10v | SM-1210 | C21, C22 |
| 2 | 680uF 63v | CE-135 | C39, C46 |
| 3 | 4.7uF 25v | SM-0805 | C47, C49, C51 |
| 4 | 4.7uF 100v | SM-1210 | C53, C54, C55, C56 |
| 4 | 1nF C0G | SM-0603 | C61, C62, C63, C64 |
| 1 | 15K | SM-0603 | R1 |
| 6 | 10K 1% | SM-0603 | R2, R33, R34, R35, R36, R59 |
| 2 | 1 | SM-0603 | R3, R22 |
| 11 | 330 | SM-0603 | R4, R14, R15, R16, R17, R18, R19, R20 +3 |
| 11 | 1K | SM-0603 | R5, R6, R23, R24, R25, R28, R29, R30 +3 |
| 2 | 100K 1% | SM-0603 | R7, R10 |
| 1 | 13.7K 1% | SM-0603 | R8 |
| 3 | 10K | SM-0603 | R9, R12, R13 |
| 1 | 31.5K 1% | SM-0603 | R11 |
| 6 | 2 | SM-0603 | R37, R38, R39, R40, R41, R42 |
| 2 | 0.0005 1% | LR2512-4 | R43, R44 |
| 1 | 47K | SM-0603 | R45 |
| 1 | 470 | SM-1206 | R47 |
| 7 | 470K 1% | SM-0603 | R48, R49, R50, R51, R56, R57, R58 |
| 4 | 22K 1% | SM-0603 | R52, R53, R54, R55 |
| 1 | 10K NTC | SM-0805 | R60 |
Phobia design files
The KiCad project lives in the rombrew/phobia-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutpmc.kicad_pcb
- Schematicpmc.kicad_sch
- BOMrev5b/pmc-bom-rev5b.csv
Phobia: common questions
What microcontroller does the Phobia use?
The Phobia is built around the STM32F405RG, from the STM32 family.
How big is the Phobia PCB?
The Phobia measures 82.6 × 55.3 mm, has 8 copper layers and is 1.599998 mm thick.
How many components are on the Phobia?
165 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Phobia design files?
From the rombrew/phobia-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Phobia design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which rombrew chose for the repository.
Can I test firmware for the Phobia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k