LED Dimmer
RossPorter506·LED_Dimmer
About the LED Dimmer PCB
LED Dimmer is an open source PCB design by RossPorter506, published on GitHub. It is a 2-layer board measuring 34.5 × 35.8 mm, with 18 components from 12 distinct parts.
Other key parts include the TLC555CDR and ZXTR2012Z. By type, the board carries 3 diodes, 3 capacitors, 2 ICs, 2 connectors, 2 resistors and 1 transistor.
From the project
Schematic and PCB layout for a dumb 5-12V LED dimming circuit, capable of 2- 99% PWM-based dimming.
No MCUs, no intelligent internet-connected devices, just a good old fashioned analog PWM dimmer using a 555 timer and a potentiometer.
Main components on the LED Dimmer
LED Dimmer bill of materials (BOM)
18 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC555CDR | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ZXTR2012Z | SOT-89-3 | U2 |
| 1 | PJA3404A_R1_00001 | SOT-23-3 | Q1 |
| 2 | 2.54mm Header | PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 4 | 54-00166 | BarrelJack_GCT_DCJ200-10-A_Horizontal | J_LED1, J_LED2, J_PS1, J_PS2 |
| 1 | PTV09A-4020S-A105 | Potentiometer_Bourns_PTV09A-1_Single_Vertical | PT1 |
| 2 | 1N4148W | D_SOD-123 | D1, D2 |
| 1 | SS0520_R1_00001 | D_SOD-123 | D3 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 1 | 200pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
LED Dimmer design files
The KiCad project lives in the RossPorter506/LED_Dimmer repository on GitHub; these links point at the commit this page was built from.
- LayoutLED_Dimmer.kicad_pcb
- SchematicLED_Dimmer.kicad_sch
LED Dimmer: common questions
How big is the LED Dimmer PCB?
The LED Dimmer measures 34.5 × 35.8 mm, has 2 copper layers and is 1.600198 mm thick.
How many components are on the LED Dimmer?
18 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED Dimmer design files?
From the RossPorter506/LED_Dimmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED Dimmer design in my own project?
The repository has no license, so all rights stay with RossPorter506. Use it as a reference, and ask the author before reusing the design.