Bluepill

rrggamer·bluepill-kicad

This repository ships a schematic but no board layout.

About the Bluepill PCB

Bluepill is an open source STM32 PCB design by rrggamer, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family.

From the project

A Blue Pill–style STM32F103C8T6 development board, designed in KiCad 10 as a learning project.

A Blue Pill–style STM32F103C8T6 development board, designed in KiCad 10 as a learning project.

- [ ] 1. MCU + power pins + decoupling - [ ] 2. Power supply (USB → AMS1117-3.3) - [ ] 3. Clocks (8 MHz HSE, 32.768 kHz LSE), reset, BOOT0/BOOT1 - [ ] 4. USB data, LEDs, pin headers, SWD - [ ] 5. ERC + footprint assignment - [ ] 6. PCB layout (53 × 22.8 mm) - [ ] 7. DRC + Gerbers/BOM

Main components on the Bluepill

Bluepill bill of materials (BOM)

1 components, 1 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1

Bluepill design files

The KiCad project lives in the rrggamer/bluepill-kicad repository on GitHub; these links point at the commit this page was built from.

Bluepill: common questions

What microcontroller does the Bluepill use?

The Bluepill is built around the STM32F103C8T6, from the STM32 family.

How many components are on the Bluepill?

1 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bluepill design files?

From the rrggamer/bluepill-kicad repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Bluepill design in my own project?

The repository has no license, so all rights stay with rrggamer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bluepill without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards