Motorbrainz

rtyle·motorbrainz·kicad/projects/motorbrainz/motorbrainz.kicad_pcb

Motorbrainz PCB layout, top view — open source board by rtyle

About the Motorbrainz PCB

Motorbrainz is an open source PCB design by rtyle, published on GitHub. It is a 4-layer board measuring 69.9 × 31.8 mm, with 35 components from 13 distinct parts.

Other key parts include the tinyPICO_Nano, 497-1396-5, 641-1698-1 and LD1117S50TR. By type, the board carries 12 resistors, 11 ICs, 7 connectors and 5 capacitors.

From the project

PCB with ESP32 microcontroller (brainz) and L298 dual full bridge (motor) driver

The ESP32 of the TinyPICO NANO can be programmed by a host over the USB connection. The ESP32 can be debugged by a host over the JTAG connection which is compatible with an esp-prog board, or equivalent.

The esp-prog BOOT and RST will not work because the esp-prog programming interface is not used. The esp-prog jumper settings will have no effect.

Warning: The motorbrainz board ties all external ground references (12V, USB and JTAG) to the same common ground. External 12V power should come from an isolated power supply to allow this. The host providing USB 5V power (directly) and JTAG power…

Main components on the Motorbrainz

tinyPICO_Nano497-1396-5641-1698-1LD1117S50TR

Motorbrainz bill of materials (BOM)

35 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
tinyPICO_Nano
UnexpectedMaker
U1
1
497-1396-5
L298P
STMicroelectronics
U2
8
641-1698-1
CDBA240LL-HF
Comchip Technology
U3, U4, U5, U6, U7, U8, U9, U10
1
LD1117S50TR
LD1117S50TR_SOT223
STMicroelectronics
U11
2
FTSH-105-01-S-DV-K
Samtec Inc.
J1, J7
1
WM1399
USB_B_Micro
Molex
J2
3
A98076
Screw_Terminal_01x02
TE Connectivity AMP Connectors
J3, J4, J5
1
SAM8907
Conn_01x03_MountingPin
Samtec Inc.
J6
3
C0603C104J3RAC7411
100nF
Kemet
C1, C3, C4
1
399-15734-1
10uF
Kemet
C2
1
445-174773-1
47uF
TDK Corporation
C5
2
P.10AU
0.1
Panasonic Electronic Components
R1, R2
10
541-3246-1
10k
Vishay Dale
R3, R4, R5, R6, R7, R8, R9, R10 +2

Motorbrainz design files

The KiCad project lives in the rtyle/motorbrainz repository on GitHub; these links point at the commit this page was built from.

Motorbrainz: common questions

How big is the Motorbrainz PCB?

The Motorbrainz measures 69.9 × 31.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Motorbrainz?

35 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Motorbrainz design files?

From the rtyle/motorbrainz repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Motorbrainz design in my own project?

The repository has no license, so all rights stay with rtyle. Use it as a reference, and ask the author before reusing the design.