18 open source boards using the LD1117S50TR

Real designs built with the LD1117S50TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the LD1117S50TR

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the LD1117S50TR connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 7 of 14 designs, most often 10 µF (then 100 nF).
  • The VO pin has a decoupling capacitor on 6 of 14 designs, most often 10 µF (then 100 nF).
  • The VOUT_2 pin is left unconnected on 3 of 5 designs (5V on 2).
GNDpin 1Connected to: GND 86%
VOpin 2Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 43% · 10 µF (8), 100 nF (3)
VIpin 3Connected to: VIN 71% · a signal 21%
  • Decoupling capacitor on 50% · 10 µF (5), 100 nF (4)
VOUT_2pin 4Connected to: Not connected 60% · 5V 40%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32XP by MechatronixLab, Hw mod dwarf by mod-audio, BrushlessESC by Tynogc and MHI-ESP-PCB by dvisser.

The LD1117S50TR in open source designs

The gallery holds 18 open source boards using the LD1117S50TR from 14 GitHub repositories; a typical one measures about 86 × 56.6 mm and carries around 84 components.

61% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is STM32XP by MechatronixLab.

Microcontrollers on boards using the LD1117S50TR

LD1117S50TR: common questions

Where can I find a LD1117S50TR reference design?

Each of the 18 boards on this page is a real design using the LD1117S50TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LD1117S50TR VI pin?

The VI pin has a decoupling capacitor on 7 of 14 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the LD1117S50TR.

What decoupling capacitors do designs use on the LD1117S50TR VO pin?

The VO pin has a decoupling capacitor on 6 of 14 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the LD1117S50TR.

How is the LD1117S50TR VOUT_2 pin connected?

The VOUT_2 pin is left unconnected on 3 of 5 designs (5V on 2). Counted from the KiCad layouts of 14 open source designs using the LD1117S50TR.

What parts are used alongside the LD1117S50TR?

The LD1117S33TR, AP2120N-3.3TRG1, CS4265-CNZ, ISL83491IBZ and LM4562MAX/NOPB appear in the most repositories here.

Which microcontrollers do boards using the LD1117S50TR use?

Most are built on AVR/Arduino (5), STM32 (5), NXP (2) and ESP8266 (1).

How big is a typical board using the LD1117S50TR?

The median is 86 × 56.6 mm, and 61% are two-layer designs.

What is the most popular open source board using the LD1117S50TR?

By GitHub stars, STM32XP by MechatronixLab, with 14 stars.

Can I simulate one of these boards using the LD1117S50TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part