HardLabs

ODROID-H3-mITX-adapter

rubenbaldewsing·ODROID-H3-mITX-adapter·src/main/main.kicad_pcb

ODROID-H3-mITX-adapter PCB layout, top view — open source board by rubenbaldewsing

About the ODROID-H3-mITX-adapter PCB

ODROID-H3-mITX-adapter is an open source PCB design by rubenbaldewsing, published on GitHub under the MIT license. It is a 4-layer board measuring 170 × 170 mm, with 59 components from 27 distinct parts.

Other key parts include the LTV-817S, CD74HCT125M96, WT32-ETH01-M3 and TPD3S014. By type, the board carries 16 resistors, 14 connectors, 9 capacitors, 8 diodes, 6 ICs and 3 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

Adapter board for mounting the ODROID H3(+) onto mITX formfactor. Including onboard LAN management, UART (BIOS) terminal and other features.

A feature rich mITX adapter for the ODROD H3(+) Designed for the NaSFW project

- 1x12 header exposing ODROID GPIO - I2C1 - I2C2 - HDMICEC - UARTRTS - UARTCTS - 1x10 header exposing ESP32 GPIO - GPIO4 - GPI36 - GPIO14 - GPIO14 5V OUT - GPIO12 - 1x6 header exposing ESP32 programming - Pin conmpatible with FT232 boards - 3V3 - RX - TX - Front IO - 2xUSB2.0 header - Front IO header - Power LED connected to +5VRUN - HDD connected to ESP32 GPIO4 - PWR button connected to ODROID - RESET button connected to ESP32 GPI39 - On board USB2.0 A connector to ODROID (USB1) - All USB - D+/D- ESD protection -…

Main components on the ODROID-H3-mITX-adapter

LTV-817SCD74HCT125M96WT32-ETH01-M3TPD3S014

ODROID-H3-mITX-adapter bill of materials (BOM)

59 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LTV-817S
U101
1
CD74HCT125M96
U201
1
WT32-ETH01-M3
U202
3
TPD3S014
U501, U601, U701
2
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J101, J401
4
CONN_01X03
Conn_01x03
J201, J501, J601, J701
1
CONN_01X06
Conn_01x06
J202
1
CONN_01X10
Conn_01x10
J203
1
CONN_02X12_ODD_EVEN
Conn_02x12_Odd_Even
J301
1
CONN_01X12
Conn_01x12
J302
4
SMTSO3035CTJ
P101, P102, P103, P104
1
BSMD0805-110-6V
F801
1
SS-12D10L3
SW101
2
TS-1187A-B-A-B
SW201, SW202
1
USB-226-BRY
USB401
1
918-518K2023D50001
USB801
4
3V3_ESP32
D201, D501, D601, D701
1
C165981
ETH_LINK
D203
1
3V3_RUN
D301
1
5V_RUN
D302
Show 7 more
QtyPartRefs
1
5V_STBY
D303
5
100NF
100nF
C201, C203, C501, C601, C701
4
C249851
150uF 10V ±20%
C202, C502, C602, C702
2
1K
R101, R103
10
100R
R102, R104, R201, R205, R301, R302, R303, R501 +2
2
100K
R202, R203
2
5.1K
R801, R802

ODROID-H3-mITX-adapter design files

The KiCad project lives in the rubenbaldewsing/ODROID-H3-mITX-adapter repository on GitHub; these links point at the commit this page was built from.

ODROID-H3-mITX-adapter: common questions

How big is the ODROID-H3-mITX-adapter PCB?

The ODROID-H3-mITX-adapter measures 170 × 170 mm, has 4 copper layers and is 1.6458 mm thick.

How many components are on the ODROID-H3-mITX-adapter?

59 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ODROID-H3-mITX-adapter design files?

From the rubenbaldewsing/ODROID-H3-mITX-adapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ODROID-H3-mITX-adapter design in my own project?

Yes, under the terms of its MIT license, which rubenbaldewsing chose for the repository.

Similar boards