11 open source boards using the TPD3S014

Real designs built with the TPD3S014, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TPD3S014

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TPD3S014 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 5V on 6 of 10 designs (a signal on 4).
  • The IN pin has a inductor on 4 of 10 designs.
GNDpin 2Connected to: GND 90%
INpin 3Connected to: 5V 60% · a signal 40%
  • Inductor on 40%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Teensy40 Minimalist USB Host by dmadison, Pocket bob by mwelling, Teensy4 esp32 sd usb host breakout by blackketter and Mdt chipdown by andykarpov.

The TPD3S014 in open source designs

The gallery holds 11 open source boards using the TPD3S014 from 10 GitHub repositories; a typical one measures about 94 × 58.4 mm and carries around 61 components.

73% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is Teensy40 Minimalist USB Host by dmadison.

Microcontrollers on boards using the TPD3S014

What boards using the TPD3S014 are built for

TPD3S014: common questions

Where can I find a TPD3S014 reference design?

Each of the 11 boards on this page is a real design using the TPD3S014. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPD3S014 IN pin connected?

The IN pin is tied to 5V on 6 of 10 designs (a signal on 4). Counted from the KiCad layouts of 10 open source designs using the TPD3S014.

Which microcontrollers do boards using the TPD3S014 use?

Most are built on STM32 (3), NXP (2), ESP32 (1) and FPGA (1).

How big is a typical board using the TPD3S014?

The median is 94 × 58.4 mm, and 73% are two-layer designs.

What is the most popular open source board using the TPD3S014?

By GitHub stars, Teensy40 Minimalist USB Host by dmadison, with 23 stars.

Can I simulate one of these boards using the TPD3S014 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part