V2 - 2
About the V2 - 2 PCB
V2 - 2 is an open source PCB design by RudgeLab, published on GitHub under the MIT license. It is a 2-layer board measuring 168 × 123 mm, with 127 components from 8 distinct parts.
By type, the board carries 100 diodes, 23 resistors, 2 connectors, 1 transistor and 1 switch.
From the project
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
Hardware design files, code and teaching materials for a low cost and open source fluorescent image registration station.
FluoPi is composed of a blue-light transilluminator, an amber acrylic filter and a raspberry camera contained in a black acrylic mainframe. All the hardware is controlled with a Raspberry pi small computer. With this equipment you are able to:
V2 - 2 bill of materials (BOM)
127 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TIP120 | TO-220_Neutral123_Horizontal | Q1 |
| 1 | BARREL_JACK | BARREL_JACK | CON1 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P1 |
| 1 | SPST | SW_DIP_x1_Slide | SW1 |
| 100 | LED | LED-5MM | D1, D2, D3, D4, D5, D6, D7, D8 +92 |
| 20 | 330 | Resistor_Horizontal_RM7mm | R1, R2, R3, R4, R5, R6, R7, R8 +12 |
| 1 | 1k | Resistor_Horizontal_RM7mm | R21 |
| 2 | Np | Resistor_Horizontal_RM7mm | R22, R23 |
V2 - 2 design files
The KiCad project lives in the RudgeLab/FluoPi repository on GitHub; these links point at the commit this page was built from.
V2 - 2: common questions
How big is the V2 - 2 PCB?
The V2 - 2 measures 168 × 123 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V2 - 2?
127 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the V2 - 2 design files?
From the RudgeLab/FluoPi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the V2 - 2 design in my own project?
Yes, under the terms of its MIT license, which RudgeLab chose for the repository.
