Hack club half life
rufus-gh·hack-club-half-life
About the Hack club half life PCB
Hack club half life is an open source PCB design by rufus-gh, published on GitHub. It is a 2-layer board measuring 62 × 100 mm, with 26 components from 4 distinct parts.
Other key parts include the 74HC00. By type, the board carries 12 ICs, 6 switches, 4 diodes and 4 resistors.
From the project
I am making a PCB where you can enter 2 3-bit binary numbers using slide switches, and then it outputs them added via LEDs.
I am making a PCB where you can enter 2 3-bit binary numbers using slide switches, and then it outputs them added via LEDs.
I first designed the logic circuit in Sebastian Lague's Digital Logic Sim, and then converted it to a schematic in Kicad and then a PCB which I used Freerouting to auto-route it.
Main components on the Hack club half life
Hack club half life bill of materials (BOM)
26 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 74HC00 | DIP-14_W7.62mm_Socket | U1, U2, U3, U4, U5, U6, U7, U8 +4 |
| 6 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | LED | LED_D3.0mm | D1, D2, D3, D4 |
| 4 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
Hack club half life design files
The KiCad project lives in the rufus-gh/hack-club-half-life repository on GitHub; these links point at the commit this page was built from.
- Layoutbinary-adder.kicad_pcb
- Schematicbinary-adder.kicad_sch
- BOMBOM.csv
Hack club half life: common questions
How big is the Hack club half life PCB?
The Hack club half life measures 62 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hack club half life?
26 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hack club half life design files?
From the rufus-gh/hack-club-half-life repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hack club half life design in my own project?
The repository has no license, so all rights stay with rufus-gh. Use it as a reference, and ask the author before reusing the design.