206 open source boards using the 74HC00
Real designs built with the 74HC00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license3238-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184AVR/Arduino
65C02 Computer
dbuchwald
203.2 × 149.9 mm62 parts2LMIT176BE6502 SBC
tebl
99.1 × 99.1 mm61 parts2LCERN-OHL-1.2128Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93RP2040/RP2350
SB-mini-II
simonboak
184.2 × 169.5 mm91 parts4LMIT74Cpu board
rjw57
99.1 × 99.1 mm68 parts2LMIT68AVR/Arduino
Minimal-UART-Computer-3
slu4coder
208.9 × 170.8 mm202 parts2LNo license43- schematic only · 56 parts
Intel8088OnBreadboard
sladorsoft
56 partsNo license41 Mgh80
Kris-Sekula
100 × 100 mm32 parts2LNo license34AVR/Arduino
6502-Computer
The-Invent0r
188.3 × 114.3 mm34 parts2LNo license31JJ65c02
jimjag
172.7 × 135.9 mm47 parts4LMIT25IONPAK V2
m-labs
201.2 × 84.7 mm259 parts4LNo license23AVR/Arduino
Peripheral board
trollectronics
165 × 100 mm248 parts2LNo license228 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018ESP8266
Deck65
and3rson
254 × 80 mm183 parts2LGPL-3.01574HCT6526 Board 3
dmolinagarcia
100 × 100 mm89 parts4LNo license14AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.0126502Rev2
stuenkels
102 × 102 mm60 parts4LNo license11AVR/Arduino
VC4000MultiROM
mkeller0815
160 × 100 mm55 parts2LMIT11Zf vga
tangent3D
143 × 85 mm52 parts2LMIT10N8 Bit Special
nrivard
100 × 100 mm45 parts4LMIT10RP2040/RP2350
Z80DevBoard
gianluca-rainis
219 × 108.5 mm179 parts4LCERN-OHL-S-2.07AVR/Arduino
AT65C02 Hobby Computer
Kayto
241.3 × 149.9 mm161 parts2LCERN-OHL-1.27Megasquirt-MS3-Bootloader
pggood
83.4 × 68.5 mm79 parts4LNo license7AVR/Arduino
Cart Ctrl Board v3
JohnSutley
152 × 82.2 mm25 parts2LNo license6Sega CDX Reproduction
RGBeter
120.5 × 155 mm260 parts6LCERN-OHL-S-2.05Claculator Keypad
Robert-Mones
210 × 119 mm195 parts6LNo license5ByteFrost
gilkeidar
215 × 140 mm36 parts2LNo license5AVR/Arduino
TCPU8-Alpha
halfburnttoast
150 × 150 mm138 partsGPL-2.04AVR/Arduino
VGA SRAM Shield
levvayner
97.8 × 53.7 mm51 parts4LNo license4No mcu distance meter
AlexIII
99.6 × 42.7 mm33 parts2LNo license4Internal sdcard interface
ifilot
219 × 88 mm77 parts2LNo license3Pedisk2
mnaberez
143.3 × 77.5 mm43 parts2LNo license36502 Main Board
acwright
100 × 100 mm34 parts2LCERN-OHL-P-2.03
How designs wire the 74HC00
Read from the KiCad layouts of 122 open source designs, one per repository: what each pin of the 74HC00 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 74 of 120 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 97% | — |
| VCCpin 14 | Connected to: 5V 91% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td hv by tdaede, Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder and 65C02 Computer by dbuchwald.
The 74HC00 in open source designs
The gallery holds 206 open source boards using the 74HC00 from 129 GitHub repositories; a typical one measures about 101.6 × 99.1 mm and carries around 51 components.
79% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is Td hv by tdaede.
Parts used alongside the 74HC00
Microcontrollers on boards using the 74HC00
What boards using the 74HC00 are built for
74HC00: common questions
Where can I find a 74HC00 reference design?
Each of the 206 boards on this page is a real design using the 74HC00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC00 VCC pin?
The VCC pin has a decoupling capacitor on 74 of 120 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 122 open source designs using the 74HC00.
What parts are used alongside the 74HC00?
The 74HC02, 74HC245, 74HC74, 74HC04 and 74HC32 appear in the most repositories here.
Which microcontrollers do boards using the 74HC00 use?
Most are built on AVR/Arduino (28), ESP32 (3), RP2040/RP2350 (3) and STM32 (2).
How big is a typical board using the 74HC00?
The median is 101.6 × 99.1 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74HC00?
By GitHub stars, Td hv by tdaede, with 370 stars.
Can I simulate one of these boards using the 74HC00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.