COP421Reader
RulecityLLC·COP421Reader·kicad/COP421Reader/StarRiderControls.kicad_pcb
About the COP421Reader PCB
COP421Reader is an open source AVR/Arduino PCB design by RulecityLLC, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 68.6 × 67.1 mm, with 23 components from 19 distinct parts.
Its main chip is the ATMega644P, from the AVR/Arduino family. Other key parts include the COP421L and FT232RL-BASICSSOP. By type, the board carries 8 capacitors, 4 resistors, 3 ICs, 2 crystals, 2 connectors and 1 jumper.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware reader for the COP421 Microcontroller
I designed it very quickly just to read the COP421 microcontroller used by the RDI Halcyon (since I have/had one temporarily on loan). It turns out it's identical to the Thayer's Quest arcade COP421 program, but it's nice to know for sure.
I relied heavily on the information at this page to contruct my reader: http://john.ccac.rwth-aachen.de:8000/patrick/COPSreader.htm
Main components on the COP421Reader
COP421Reader bill of materials (BOM)
23 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMega644P | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | COP421L | DIP-24_W15.24mm_Socket | U2 |
| 1 | FT232RL-BASICSSOP | SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | USBPTH | USB-B-PTH | X5 |
| 1 | 18.432MHz | CRYSTAL-CSM-3X | Y1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J2 |
| 1 | PINHD-1X2 | 1X02 | JP1 |
| 1 | SWITCH-MOMENTARY-2PTH | TACTILE-PTH | S1 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | EXCELSA35 | EXCELSA35 | L1 |
| 4 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C13, C14 |
| 2 | 20pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 1 | 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 1 | 4.7uF | EIA3216 | C15 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 330 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
COP421Reader design files
The KiCad project lives in the RulecityLLC/COP421Reader repository on GitHub; these links point at the commit this page was built from.
COP421Reader: common questions
What microcontroller does the COP421Reader use?
The COP421Reader is built around the ATMega644P, from the AVR/Arduino family.
How big is the COP421Reader PCB?
The COP421Reader measures 68.6 × 67.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the COP421Reader?
23 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the COP421Reader design files?
From the RulecityLLC/COP421Reader repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the COP421Reader design in my own project?
Yes, under the terms of its BSD-2-Clause license, which RulecityLLC chose for the repository.
Can I test firmware for the COP421Reader without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k