Motor board
rustyducks·motor_board·hardware/kicad/motor_board.kicad_pcb
About the Motor board
Motor board is an open source STM32 PCB design by rustyducks, published on GitHub. It is a 2-layer board measuring 86 × 82 mm, with 84 components from 47 distinct parts.
Its main chip is the STM32F767VITx, from the STM32 family. Other key parts include the TLE52062GAUMA1, LM3940IMP-3.3, LM22673MRE-ADJ and MCP2551-I-SN. By type, the board carries 30 capacitors, 19 resistors, 14 connectors, 8 LEDs, 7 ICs and 3 diodes.
From the project
- control up to 3 DC motors - 4 hardware encoder inputs.
- control up to 3 DC motors - 4 hardware encoder inputs.
Holonomic drive: Use the 3 motors, and the first 3 encoders.
Differential drive: Use the first 2 motors. Use the first 2 encodeurs for the motor encodeurs, and the last 2 for the odometry wheels (if applicable).

Main components on the Motor board
Motor board bill of materials (BOM)
84 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TLE52062GAUMA1 | TLE52052GAUMA1 | IC1, IC2, IC3 |
| 1 | LM3940IMP-3.3 | LM3940IMP | IC4 |
| 1 | LM22673MRE-ADJ | TI_SO-PowerPAD-8 | U1 |
| 1 | STM32F767VITx | LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | MCP2551-I-SN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 8Z_16MHz | Crystal_8Z | Q1 |
| 1 | MOT1 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | MOT2 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
| 1 | MOT3 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | UART | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | I2C | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | USB_Micro-B_Rec | USB_Micro-B_Molex_105017-0001 | J6 |
| 1 | ENC2 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J7 |
| 1 | ENC3 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J8 |
| 1 | ENC4 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | ENC8 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J10 |
| 1 | SWD | PicoBlade_53398-0571 | J11 |
| 1 | SPI | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J12 |
| 1 | CAN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | Power_pads | Power_pads | P1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SolderJumper_2P | SolderJumper_2P_TrianglePads_0603 | JP1 |
| 1 | KP-1608CGCK | KP-1608CGCK | LED1 |
| 5 | KP-1608SYC | KP-1608SYC | LED2, LED5, LED6, LED7, LED8 |
| 1 | KP-1608SURC | KP-1608SURC | LED3 |
| 1 | KP-1608SEC | KP-1608SEC | LED4 |
| 1 | PMEG4050ETP | D_SOD-128 | D1 |
| 2 | PMEG2010EB | PMEG2010EB | D2, D3 |
| 1 | 8.2uH | L_Wuerth_WE-PD-Typ-LS | L1 |
| 1 | 22uF | CP_EIA-7343-31_Kemet-D | C1 |
| 1 | 6.8nF | C_0603 | C2 |
| 4 | 1uF | C_0603 | C3, C12, C26, C28 |
| 3 | 100uF | CP_Elec_8x10 | C4, C5, C6 |
| 12 | 100nF | C_0603 | C7, C8, C9, C17, C19, C21, C22, C23 +4 |
| 1 | 10nF | C_0603 | C10 |
| 1 | 120uF | CP_Elec_8x10 | C11 |
| 2 | 2.2uF | C_0603 | C13, C14 |
| 2 | 18pF | C_0603 | C15, C16 |
| 1 | 4.7uF | C_0603 | C18 |
| 1 | 470nF | C_0603 | C20 |
| 1 | 330nF | C_0603 | C24 |
| 1 | infΩ | R_0603 | R1 |
| 3 | 1.5KΩ | R_0603 | R2, R3, R4 |
| 4 | 2.2KΩ | R_0603 | R5, R10, R15, R16 |
| 8 | 390Ω | R_0603 | R6, R7, R8, R9, R13, R14, R17, R18 |
| 1 | 10KΩ | R_0603 | R11 |
| 1 | 0Ω | R_0603 | R12 |
| 1 | 120Ω | R_0603 | R19 |
Motor board design files
The KiCad project lives in the rustyducks/motor_board repository on GitHub; these links point at the commit this page was built from.
Motor board: common questions
What microcontroller does the Motor board use?
The Motor board is built around the STM32F767VITx, from the STM32 family.
How big is the Motor board?
The Motor board measures 86 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor board?
84 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor board design files?
From the rustyducks/motor_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Motor board design in my own project?
The repository has no license, so all rights stay with rustyducks. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Motor board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k