HardLabs

AgentPing

rwrife·AgentPing·hardware/kicad/agentping-carrier.kicad_pcb

AgentPing PCB layout, top view — open source board by rwrife
Simulate this board

About the AgentPing PCB

AgentPing is an open source PCB design by rwrife, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 60 mm, with 15 components from 13 distinct parts.

By type, the board carries 4 connectors, 4 resistors, 3 diodes, 2 capacitors, 1 transistor and 1 fuse.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

Physical desk-side inbox and response surface for AI coding agents using a Windows/.NET bridge and ESP32-C6 AMOLED touch display.

Hardware is separated by exact module: Waveshare ESP32-C6-Touch-AMOLED-1.64 and Waveshare ESP32-S3-LCD-1.47B (172 x 320 ST7789, no touch; not the non-B model). Start with the enclosure chooser.

The optional low-voltage Rev A0 carrier below remains C6-only. It has not been adapted to the S3 pinout or mounting layout. Neither small standalone enclosure fits this 70 x 60 mm carrier. No RF design is modified.

AgentPing bill of materials (BOM)

15 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AO3400A
Alpha & Omega Semiconductor
Q1
1
SSW-110-02-G-S
WAVESHARE MODULE P1
Samtec
J1
1
SSW-110-02-G-S
WAVESHARE MODULE P2
Samtec
J2
1
USB4105-GF-A
USB-C POWER ONLY
Global Connector Technology
J3
1
B2B-PH-K-S(LF)(SN)
HAPTIC 5V <=150mA
JST
J4
1
MF-MSMF050-2
500mA HOLD / 1A TRIP
Bourns
F1
1
SMF5.0A
Littelfuse
D1
1
B140-13-F
Diodes Incorporated
D2
1
B5819W-7-F
Diodes Incorporated
D3
2
GRM188R71H104KA93D
100nF 50V X7R
Murata
C1, C2
2
RC0603FR-075K1L
5.1k 1%
Yageo
R1, R2
1
RC0603FR-07100RL
100R 1%
Yageo
R3
1
RC0603FR-07100KL
100k 1%
Yageo
R4

AgentPing design files

The KiCad project lives in the rwrife/AgentPing repository on GitHub; these links point at the commit this page was built from.

AgentPing: common questions

How big is the AgentPing PCB?

The AgentPing measures 70 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AgentPing?

15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AgentPing design files?

From the rwrife/AgentPing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AgentPing design in my own project?

Yes, under the terms of its MIT license, which rwrife chose for the repository.

Similar boards