Throwaway

sadilek·irrigation_controller·boards/throwaway/eda/throwaway.kicad_pcb

Throwaway PCB layout, top view — open source board by sadilek

About the Throwaway PCB

Throwaway is an open source PCB design by sadilek, published on GitHub. It is a 2-layer board measuring 40 × 25 mm, with 6 components from 6 distinct parts.

Other key parts include the AMS1117-3.3. By type, the board carries 2 capacitors, 1 IC, 1 connector, 1 diode and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

Garden irrigation controller and valve node: PCBs as code, enclosures, firmware

Sprinkler valves sit in plastic boxes in the ground. A buried network cable (CAT-6) runs from the shed through every box, one after the other. This project replaces the electronics on both ends of that cable:

- Valve node, one per box: a small board in a sealed, 3D-printed enclosure that switches the 24 V AC solenoid valves. - Controller, in the shed: powers the cable and connects it to Home Assistant through ESPHome.

Throwaway, from the project README
From the project README

Main components on the Throwaway

Throwaway bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
AMS1117-3.3
Advanced Monolithic Systems
U1
1
B-2100S02P-A110
2.54mm 2 x 1 THT Vertical Male
Ckmtw
J1
1
19-217/GHC-YR1S2/3T
LED GREEN
Everlight
D1
1
CL21A106KAYNNNE
10uF 25V
Samsung Electro-Mechanics
C1
1
CL21A226MAQNNNE
22uF 25V
Samsung Electro-Mechanics
C2
1
0603WAF1001T5E
1k
UNI-ROYAL
R1

Throwaway design files

The KiCad project lives in the sadilek/irrigation_controller repository on GitHub; these links point at the commit this page was built from.

Throwaway: common questions

How big is the Throwaway PCB?

The Throwaway measures 40 × 25 mm, has 2 copper layers and is 1.62 mm thick.

How many components are on the Throwaway?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Throwaway design files?

From the sadilek/irrigation_controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Throwaway design in my own project?

The repository has no license, so all rights stay with sadilek. Use it as a reference, and ask the author before reusing the design.

More boards in irrigation_controller

Similar boards