Valve node

sadilek·irrigation_controller·boards/valve-node/eda/valve-node.kicad_pcb

Valve node PCB layout, top view — open source AVR/Arduino board by sadilek

About the Valve node PCB

Valve node is an open source AVR/Arduino PCB design by sadilek, published on GitHub. It is a 2-layer board measuring 96 × 44 mm, with 39 components from 27 distinct parts.

Its main chip is the ATTINY1616-MNR, from the AVR/Arduino family. Other key parts include the EL3053S1(TA)-V, LTV-814S-TA1, HT7550-1 and THVD2410DR. By type, the board carries 12 resistors, 7 ICs, 6 capacitors, 5 diodes, 4 connectors and 2 transistors.

It belongs with the iot & wireless designs in this gallery.

From the project

Garden irrigation controller and valve node: PCBs as code, enclosures, firmware

Sprinkler valves sit in plastic boxes in the ground. A buried network cable (CAT-6) runs from the shed through every box, one after the other. This project replaces the electronics on both ends of that cable:

- Valve node, one per box: a small board in a sealed, 3D-printed enclosure that switches the 24 V AC solenoid valves. - Controller, in the shed: powers the cable and connects it to Home Assistant through ESPHome.

Valve node, from the project README
From the project README

Main components on the Valve node

Valve node bill of materials (BOM)

39 components, 27 distinct parts.

QtyPartRefs
2
EL3053S1(TA)-V
Everlight
U1, U3
2
LTV-814S-TA1
Lite-On
U2, U4
1
ATTINY1616-MNR
Microchip
U5
1
HT7550-1
Holtek
U6
1
THVD2410DR
Texas Instruments
U7
2
T410-600B-TR
STMicroelectronics
Q1, Q2
2
RJHSE-5080
Amphenol ICC
J1, J2
1
2.54-1*3PPin
2.54mm 3 x 1 THT Vertical Male
BOOMELE
J3
1
KF142R-5.08-4P
Cixi Kefa Elec
J4
1
mSMD020-60V
0.2A 60V
TECHFUSE
F1
1
mSMD050-60V
0.5A 60V
TECHFUSE
F2
1
DSHP04TSGET
Kingtek
SW1
1
SMBJ15CA-E3/52
SMBJ15CA
Vishay
D1
1
M7
MDD
D2
1
PSM712-LF-T7
PSM712
ProTek Devices
D3
1
SMBJ48CA
Littelfuse
D4
1
19-217/GHC-YR1S2/3T
LED GREEN
Everlight
D5
1
TAJA106K016RNJ
10uF 16V Ta
Kyocera AVX
C1
2
CC0603KRX7R9BB104
100nF 50V X7R
YAGEO
C2, C3
1
CL31A106KBHNNNE
10uF 50V X5R
Samsung Electro-Mechanics
C4
Show 7 more
QtyPartRefs
2
CC0805KKX7R0BB104
100nF 100V X7R
YAGEO
C5, C6
2
0805W8F1500T5E
150
UNI-ROYAL
R1, R6
3
0603WAF1001T5E
1k
UNI-ROYAL
R2, R7, R11
2
0603WAF2200T5E
220
UNI-ROYAL
R3, R8
2
0805W8F1502T5E
15k
UNI-ROYAL
R4, R9
2
0805W8F1000T5E
100
UNI-ROYAL
R5, R10
1
0603WAF1002T5E
10k
UNI-ROYAL
R12

Valve node design files

The KiCad project lives in the sadilek/irrigation_controller repository on GitHub; these links point at the commit this page was built from.

Valve node: common questions

What microcontroller does the Valve node use?

The Valve node is built around the ATTINY1616-MNR, from the AVR/Arduino family.

How big is the Valve node PCB?

The Valve node measures 96 × 44 mm, has 2 copper layers and is 1.62 mm thick.

How many components are on the Valve node?

39 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Valve node design files?

From the sadilek/irrigation_controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Valve node design in my own project?

The repository has no license, so all rights stay with sadilek. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Valve node without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in irrigation_controller

Similar boards