EAS ERM Driver mini PANEL
sagar-aryan·ead-v1·hardware/erm-driver-pcb/EAS_ERM_Driver_mini/output/EAS_ERM_Driver_mini_PANEL.kicad_pcb
About the EAS ERM Driver mini PANEL PCB
EAS ERM Driver mini PANEL is an open source PCB design by sagar-aryan, published on GitHub under the MIT license. It is a 2-layer board measuring 38.9 × 29.3 mm, with 64 components from 28 distinct parts.
Other key parts include the HT7833. By type, the board carries 20 capacitors, 18 connectors, 12 resistors, 6 transistors, 6 diodes and 2 ICs.
From the project
A right-leg, barefoot wearable for gait research after stroke, built on error augmentation. Two IMUs on the foot and shank detect every gait cycle; the device scores each cycle against the wearer's own recorded baseline and, when a step is off, cues it through six vibration motor
A right-leg, barefoot wearable for gait research after stroke, built on error augmentation. Two IMUs on the foot and shank detect every gait cycle; the device scores each cycle against the wearer's own recorded baseline and, when a step is off, cues it through six vibration motors on a calf band. A desktop dashboard records the raw data, manages baselines and sessions, and exports CSV, MATLAB and PDF.

Main components on the EAS ERM Driver mini PANEL
EAS ERM Driver mini PANEL bill of materials (BOM)
64 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | HT7833 | SOT-89-3_0.4mm | U1, U2 |
| 6 | IRLML6344 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | SWITCHED_SYSTEM+ | WirePad_3.0x2.5mm | J1 |
| 1 | GND | WirePad_3.0x2.5mm | J2 |
| 1 | ESP_SW_BAT+ | WirePad_2.0x2.0mm | J3 |
| 1 | ESP_GND | WirePad_2.0x2.0mm | J4 |
| 1 | PWM1 | WirePad_2.0x2.0mm | J5 |
| 1 | PWM2 | WirePad_2.0x2.0mm | J6 |
| 1 | PWM3 | WirePad_2.0x2.0mm | J7 |
| 1 | PWM4 | WirePad_2.0x2.0mm | J8 |
| 1 | PWM5 | WirePad_2.0x2.0mm | J9 |
| 1 | PWM6 | WirePad_2.0x2.0mm | J10 |
| 1 | MOTOR_A+ | WirePad_2.5x7.0mm | J11 |
| 1 | M1- | WirePad_2.5x2.5mm | J12 |
| 1 | M2- | WirePad_2.5x2.5mm | J13 |
| 1 | M3- | WirePad_2.5x2.5mm | J14 |
| 1 | MOTOR_B+ | WirePad_2.5x7.0mm | J15 |
| 1 | M4- | WirePad_2.5x2.5mm | J16 |
| 1 | M5- | WirePad_2.5x2.5mm | J17 |
| 1 | M6- | WirePad_2.5x2.5mm | J18 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1N5819W | D_SOD-123 | D1, D2, D3, D4, D5, D6 |
| 4 | 1uF | C_1206_3216Metric | C1, C2, C5, C6 |
| 2 | 10uF | C_1206_3216Metric | C3, C4 |
| 2 | 220uF | CP_Elec_5x5.9 | C7, C8 |
| 6 | 10nF | C_1206_3216Metric | C9, C10, C11, C12, C13, C14 |
| 6 | 100nF | C_1206_3216Metric | C15, C16, C17, C18, C19, C20 |
| 6 | 100 | R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 6 | 100k | R_1206_3216Metric | R7, R8, R9, R10, R11, R12 |
EAS ERM Driver mini PANEL design files
The KiCad project lives in the sagar-aryan/ead-v1 repository on GitHub; these links point at the commit this page was built from.
EAS ERM Driver mini PANEL: common questions
How big is the EAS ERM Driver mini PANEL PCB?
The EAS ERM Driver mini PANEL measures 38.9 × 29.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EAS ERM Driver mini PANEL?
64 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EAS ERM Driver mini PANEL design files?
From the sagar-aryan/ead-v1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the EAS ERM Driver mini PANEL design in my own project?
Yes, under the terms of its MIT license, which sagar-aryan chose for the repository.