EAS ERM Driver tight PANEL

sagar-aryan·ead-v1·hardware/erm-driver-pcb/EAS_ERM_Driver_tight/output/EAS_ERM_Driver_tight_PANEL.kicad_pcb

EAS ERM Driver tight PANEL PCB layout, top view — open source board by sagar-aryan

About the EAS ERM Driver tight PANEL PCB

EAS ERM Driver tight PANEL is an open source PCB design by sagar-aryan, published on GitHub under the MIT license. It is a 2-layer board measuring 36.1 × 27.6 mm, with 64 components from 28 distinct parts.

Other key parts include the HT7833. By type, the board carries 20 capacitors, 18 connectors, 12 resistors, 6 transistors, 6 diodes and 2 ICs.

From the project

A right-leg, barefoot wearable for gait research after stroke, built on error augmentation. Two IMUs on the foot and shank detect every gait cycle; the device scores each cycle against the wearer's own recorded baseline and, when a step is off, cues it through six vibration motor

A right-leg, barefoot wearable for gait research after stroke, built on error augmentation. Two IMUs on the foot and shank detect every gait cycle; the device scores each cycle against the wearer's own recorded baseline and, when a step is off, cues it through six vibration motors on a calf band. A desktop dashboard records the raw data, manages baselines and sessions, and exports CSV, MATLAB and PDF.

EAS ERM Driver tight PANEL, from the project README
From the project README

Main components on the EAS ERM Driver tight PANEL

EAS ERM Driver tight PANEL bill of materials (BOM)

64 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
HT7833
U1, U2
6
IRLML6344
Q1, Q2, Q3, Q4, Q5, Q6
1
SWITCHED_SYSTEM+
J1
1
GND
J2
1
ESP_SW_BAT+
J3
1
ESP_GND
J4
1
PWM1
J5
1
PWM2
J6
1
PWM3
J7
1
PWM4
J8
1
PWM5
J9
1
PWM6
J10
1
MOTOR_A+
J11
1
M1-
J12
1
M2-
J13
1
M3-
J14
1
MOTOR_B+
J15
1
M4-
J16
1
M5-
J17
1
M6-
J18
Show 8 more
QtyPartRefs
6
1N5819W
D1, D2, D3, D4, D5, D6
4
1uF
C1, C2, C5, C6
2
10uF
C3, C4
2
220uF
C7, C8
6
10nF
C9, C10, C11, C12, C13, C14
6
100nF
C15, C16, C17, C18, C19, C20
6
100
R1, R2, R3, R4, R5, R6
6
100k
R7, R8, R9, R10, R11, R12

EAS ERM Driver tight PANEL design files

The KiCad project lives in the sagar-aryan/ead-v1 repository on GitHub; these links point at the commit this page was built from.

EAS ERM Driver tight PANEL: common questions

How big is the EAS ERM Driver tight PANEL PCB?

The EAS ERM Driver tight PANEL measures 36.1 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EAS ERM Driver tight PANEL?

64 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EAS ERM Driver tight PANEL design files?

From the sagar-aryan/ead-v1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the EAS ERM Driver tight PANEL design in my own project?

Yes, under the terms of its MIT license, which sagar-aryan chose for the repository.

More boards in ead-v1