LAN9645-STM32-Managed-Ethernet-Switch
SamuelCicuitStudio·LAN9645-STM32-Managed-Ethernet-Switch·Hardware/SourceFiles/EthernetSwitch.kicad_pcb
About the LAN9645-STM32-Managed-Ethernet-Switch PCB
LAN9645-STM32-Managed-Ethernet-Switch is an open source STM32 PCB design by SamuelCicuitStudio, published on GitHub. It is a 6-layer board measuring 98.9 × 81.5 mm, with 228 components from 62 distinct parts.
Its main chip is the STM32H743BIT6, from the STM32 family. Other key parts include the MIC24051YJL-TR, USBLC6-2P6, LN96459 and MIC23303YML-TR. By type, the board carries 109 capacitors, 76 resistors, 14 inductors, 12 connectors, 6 diodes and 5 ICs.
From the project
Managed Ethernet switch platform built around the LAN9645 and STM32H743, featuring copper and SerDes ports, SPI management, RMII, LwIP, and a USB diagnostic CLI.
This repository contains a managed Ethernet switch platform built around a LAN9645 switch and an STM32H743 management MCU. The board is designed around two active copper ports, two active SerDes paths, a CPU-facing RMII connection, SPI-based management, and a USB-first CLI and diagnostics workflow.
This README.md is intentionally written as the main project handbook. The goal of this file is that a user should be able to understand the hardware, the firmware structure, the boot sequence, the runtime behavior, the LAN9645 feature surface, and the current CLI without needing to open the…

Main components on the LAN9645-STM32-Managed-Ethernet-Switch
LAN9645-STM32-Managed-Ethernet-Switch bill of materials (BOM)
228 components, 62 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743BIT6 | LQFP-208_28x28mm_P0.5mm | U1 |
| 1 | MIC24051YJL-TR | QFN28_5X6_MCH | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | LN96459 | 128-TQFP | U4 |
| 1 | MIC23303YML-TR | DFN12_3X3_ML_MCH | U5 |
| 1 | IRF4905STRLPBF | TRAN_IRF4905STRLPBF_INF | Q1 |
| 1 | 8Mhz | Crystal_SMD_HC49-SD | Y1 |
| 1 | ABM8G-25.000MHZ-B4Y-T | XTAL_ABM8G-25.000MHZ-B4Y-T | Y2 |
| 1 | DSC1101BI2-125.0000 | 6-VDFN | Y3 |
| 4 | Conn_02x02_Row_Letter_Last | PinHeader_2x02_P2.54mm_Vertical | J1, J3, J10, J12 |
| 1 | Conn_02x06_Row_Letter_Last | PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x01_Row_Letter_First | PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J5 |
| 2 | 08B0-1X1T-36-F | BEL_08B0-1X1T-36-F | J6, J14 |
| 2 | SFP | Connector_SFP_and_Cage | J9, J11 |
| 1 | USB4215-03-A | CONN_8p94X6p5X3p16_12L_GCC | J13 |
| 2 | 1825910-6 | SW_1825910-6-4 | SW1, SW2 |
| 1 | NCD0805G1 | LED_0603_1608Metric | D1 |
| 1 | NCD0805R1 | LED_0603_1608Metric | D2 |
| 1 | SZYY0805B | LED_0603_1608Metric | D3 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTST-C170KFKT | LED_0603_1608Metric | D4 |
| 1 | PMEG2010AEH | D_SOD-123F | D5 |
| 1 | BZX84C12 | SOT-23-3 | D6 |
| 1 | 220Ω@100MHz | L_0805_2012Metric | FB1 |
| 1 | 600 Ω | L_0603_1608Metric | FB2 |
| 6 | 33 Ω @ 100 MHz, 3 A | L_0603_1608Metric | FB4, FB5, FB6, FB10, FB11, FB15 |
| 4 | 220 Ω | L_0603_1608Metric | FB7, FB8, FB13, FB14 |
| 1 | XAL7070-682MEC | IND_XAL7070_COC | L1 |
| 1 | NR3015T1R0N | IND_TAIYO_NR3015_TAY | L2 |
| 65 | 100nf | C_0603_1608Metric | C1, C5, C9, C10, C11, C13, C14, C16 +57 |
| 2 | 1uF | C_0603_1608Metric | C2, C25 |
| 7 | 4.7uF | C_0603_1608Metric | C3, C8, C44, C45, C78, C80, C81 |
| 3 | 1uF | C_0805_2012Metric | C4, C39, C51 |
| 2 | 20pF | C_0805_2012Metric | C6, C7 |
| 3 | 2.2uF | C_0603_1608Metric | C12, C15, C19 |
| 9 | 100nf | C_0805_2012Metric | C17, C20, C21, C28, C32, C46, C47, C58 +1 |
| 1 | 4700pF | C_0402_1005Metric | C23 |
| 1 | 100uF | C_1206_3216Metric | C29 |
| 2 | DNP | C_0805_2012Metric | C34, C75 |
| 2 | 15pF | C_0603_1608Metric | C41, C56 |
| 1 | 10000pF | C_0402_1005Metric | C42 |
| 1 | 33pF | C_0603_1608Metric | C64 |
| 2 | 22uF | C_0805_2012Metric | C68, C71 |
| 8 | 10uF | C_0603_1608Metric | C69, C70, C76, C77, C92, C93, C106, C107 |
| 25 | 1kΩ | R_0603_1608Metric | R1, R2, R8, R9, R39, R40, R41, R42 +17 |
| 15 | 10KΩ | R_0603_1608Metric | R3, R14, R36, R37, R48, R59, R60, R61 +7 |
| 5 | 0Ω | R_0603_1608Metric | R4, R6, R7, R38, R47 |
| 1 | 10MΩ | R_0603_1608Metric | R5 |
| 1 | 19.1kΩ | R_0805_2012Metric | R10 |
| 1 | 8.2kΩ 1% | R_0805_2012Metric | R11 |
| 1 | 2.61kΩ 1% | R_0805_2012Metric | R12 |
| 2 | 5.1kΩ | R_0603_1608Metric | R13, R15 |
| 3 | 3.3KΩ | R_0603_1608Metric | R16, R17, R18 |
| 2 | 10Ω | R_0603_1608Metric | R19, R46 |
| 10 | 22Ω | R_0603_1608Metric | R20, R21, R22, R23, R24, R25, R26, R27 +2 |
| 1 | 200Ω@1% | R_0805_2012Metric | R29 |
| 1 | 6kΩ@1% | R_0805_2012Metric | R30 |
| 1 | 100kΩ | R_0603_1608Metric | R31 |
| 4 | 470Ω | R_0603_1608Metric | R32, R33, R34, R35 |
| 1 | DNP | R_0805_2012Metric | R45 |
| 1 | 232kΩ | R_0805_2012Metric | R56 |
| 1 | 270kΩ | R_0603_1608Metric | R57 |
LAN9645-STM32-Managed-Ethernet-Switch design files
The KiCad project lives in the SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch repository on GitHub; these links point at the commit this page was built from.
LAN9645-STM32-Managed-Ethernet-Switch: common questions
What microcontroller does the LAN9645-STM32-Managed-Ethernet-Switch use?
The LAN9645-STM32-Managed-Ethernet-Switch is built around the STM32H743BIT6, from the STM32 family.
How big is the LAN9645-STM32-Managed-Ethernet-Switch PCB?
The LAN9645-STM32-Managed-Ethernet-Switch measures 98.9 × 81.5 mm, has 6 copper layers and is 1.5842 mm thick.
How many components are on the LAN9645-STM32-Managed-Ethernet-Switch?
228 components, from 62 distinct parts. The full bill of materials is listed on this page.
Where can I download the LAN9645-STM32-Managed-Ethernet-Switch design files?
From the SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LAN9645-STM32-Managed-Ethernet-Switch design in my own project?
The repository has no license, so all rights stay with SamuelCicuitStudio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LAN9645-STM32-Managed-Ethernet-Switch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k