N-Con-Board-2026
About the N-Con-Board-2026
N-Con-Board-2026 is an open source PCB design by satspares, published on GitHub under the MIT license. It is a 2-layer board measuring 105 × 55 mm, with 18 components from 14 distinct parts.
By type, the board carries 7 connectors, 3 relays, 3 diodes, 3 capacitors, 1 switch and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
ldmos amp pcb and software using dwin display
28th April 2026. New Software and PCB Improve Graphics. Add save drive settings per. band.
LDMOS control software and PCB design for dxworld - QRPblog A600 - or similar amps using DWIN display.
DMG80480C05004W 5inch we need touch version DMG80480C05004WTC 800x480
DMG80480T050_A5W more cost has case speaker and rs232
DMG80480C043_02W 4.3 inch 800x480 I have this one a bit small for big fingers.
N-Con-Board-2026 bill of materials (BOM)
18 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMA-AMP-In | SMA_Amphenol_132134_Vertical | J1 |
| 1 | N-Type-Antenna | N_TYPE | J2 |
| 1 | Rig N-Type | N_TYPE | J3 |
| 1 | 12v Bias Out | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | AMP/LPF Output | SolderWirePad_1x02_SMD_11x6mm | J5 |
| 1 | PTT | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | 12v Input | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J7 |
| 2 | G2RL-1-E-DC12 | G2RL1EDC24 | K1, K2 |
| 1 | HK4100F-DC5V-SHG HK4100F-DC12V-SHG | HK4100FDC5VSHG | K3 |
| 1 | SW_Push_Test | SW_PUSH_6mm | SW1 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | LED_Small | LED_D3.0mm | D3 |
| 3 | 100NF 100nf | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
N-Con-Board-2026 design files
The KiCad project lives in the satspares/ldmos_design_with_dwin_display repository on GitHub; these links point at the commit this page was built from.
N-Con-Board-2026: common questions
How big is the N-Con-Board-2026?
The N-Con-Board-2026 measures 105 × 55 mm, has 2 copper layers and is 1.600198 mm thick.
How many components are on the N-Con-Board-2026?
18 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the N-Con-Board-2026 design files?
From the satspares/ldmos_design_with_dwin_display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the N-Con-Board-2026 design in my own project?
Yes, under the terms of its MIT license, which satspares chose for the repository.
More boards in ldmos_design_with_dwin_display
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k